Epson EB-PU1006W User Manual page 243

Setting
HDBaseT
Color Calibration
Options
Control Communications
Extron XTP
Color Calibration
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
243
Description
Selects the communication
settings for connections to an
HDBaseT transmitter or switcher
Control Communications:
enables or disables
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's LAN, RS-
232C, and Remote ports (Extron
XTP must be turned off to use
this setting)
Extron XTP: set to On when you
connect an Extron XTP
transmitter or switcher to the
HDBaseT ports
Adjusts the color balance and
brightness and restores the
default image quality
Color Calibration: select On to
enable color calibration
Start Auto Adjustment: starts
auto adjustment
Undo: undo the auto adjustment
Redo: restore the auto
adjustment if you selected Undo
Color Uniformity: adjusts the
color tone balance for the whole
image
Reset: resets all color calibration
values to their default settings