PICTURE Menu
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and
the lens iris on/off.
• ON:
• OFF:
WAVEFORM MONITOR
You can monitor whether or not the luminance level of
the input signal is in the recommended range by
displaying it in the waveform monitor. If the waveform is
not in the range, adjust it for the best quality. See
"Adjusting the waveform of the input signal" on page 24.
OFF
FULL SCAN(Y)
FULL SCAN(R)
FULL SCAN(G)
FULL SCAN(B)
SINGLE LINE SCAN(Y)
SINGLE LINE SCAN(R)
SINGLE LINE SCAN(G)
SINGLE LINE SCAN(B)
MONITOR POSITION
1. Press F G to move to the required waveform
style.
2. Press ENTER to select.
The WAVEFORM MONITOR will be
displayed.
3. Adjust the WAVEFORM MONITOR.
See "Adjusting the waveform of the input
signal" on page 24.
32 - E
NGLISH
Automatic adjustment
No adjustment
UPPER LEFT
ADVANCED MENU
From the ADVANCED MENU, you can perform more
detailed image adjustment manually.
GAMMA
You can adjust linear intensity at 3 levels. Press
I H to increase/decrease 1 point.
Levels
GAMMA HIGH
GAMMA MID
GAMMA LOW
Setting range: -8 to +8
CONTRAST
You can adjust the amount of contrast in RGB
colors individually. Press I H to
increase/decrease 1 point.
RGB
CONTRAST R
CONTRAST G
CONTRAST B
Setting range: -32 to +32
BRIGHTNESS
You can adjust the brightness in RGB colors
individually. Press I H to increase/decrease
1 point.
RGB
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
Setting range: -16 to +16
COLOR MANAGEMENT
You can manage your own defined color settings.
See "Setting your own color profile" on page 26.
NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press I H to select the required
setting.
• ON:
Automatic noise reduction
• OFF:
No noise reduction
NOTE:
Applying noise reduction may affect image quality.
Default setting
0
0
0
Default setting
0
0
0
Default setting
0
0
0