Connections; Before Connection To The Projector; Connecting With Component/Video/S-Video; Connecting With Hdmi/Pc - Panasonic PT-AE1000U Operating Instructions Manual

Connections

Before connection to the projector

Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See "List of compatible signals" on page 45.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.

Connecting with COMPONENT/VIDEO/S-VIDEO

Connecting with HDMI/PC

(RP-CDHG30: Optional)
NOTE:
Make sure the HDMI cable is adapted to your HDMI device for proper performance.
A compatible cable is required for an HDMI 1 080p signal.
It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not
project the image properly or other problems could be encountered. See "Serial terminal" on page 46.
18 - E
NGLISH
To component
video output
DVD player
HDMI cable
To HDMI output
DVD player
To video
output
Video player DVD player
RGB signal cable
To RGB output
PC
To S-video
output