Setting Your Own Color Profile - Panasonic PT-AE1000U Operating Instructions Manual

Remote control operation

Setting your own color profile

You can adjust a selected color individually
and save and retrieve under the PICTURE
MODE setting. Press the COLOR
MANAGEMENT button to open the menu.
PROFILE
CURSOR
LOG
PROFILE SAVE
Create a new profile
Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1. Select the CURSOR menu and press
ENTER.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor
will not be displayed. See "Managing stored
logs" on page 26.
Target cursor
2. Move the cursor with F G I H to the
required place to select a color and press
ENTER.
The color at the center of the target cursor is
sampled and the sample box is displayed on
the left of the cursor. The menu items are
displayed on the upper part of the screen.
CURSOR
SELECT
DEFAULT
Sampled color
26 - E
NGLISH
NORMAL
RETURN
COLOR
TINT
ENTER
BRIGHTNESS
3. Select a menu item and the I H to adjust
each item level.
The result box is displayed on the right of the
cursor and shows the adjusted color.
CURSOR
RETURN
SELECT
ENTER
DEFAULT
Adjust the vividness of the color.
COLOR
Setting range: -30 to +30
Adjust the color tone.
TINT
Setting range: -30 to +30
Adjust the brightness of the color.
BRIGHTNESS
Setting range: -20 to +20
4. Press ENTER to store the adjusted result.
"PROCESSING" is displayed for a few seconds
and the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
5. Press MENU or RETURN to return to the
previous menu.
Repeat the steps above to store more
adjustment.
COLOR
TINT
BRIGHTNESS
Adjusted color