Table of Contents
Advertisement
Firmware Upgrade
This flash supports firmware upgrade through the USB port. Update
information will be released on our official website.
USB connection line is not included in this product. The USB
port is a standard Micro USB socket. Common USB
connection line is applicable.
Checking the version: Press the <MODE> Button and the turn the
flash on. Then, the firmware update version (e.g. Version 1.0 will
read U-1.0) will be displayed on the LCD panel.
Technical Data
Model
TT350C
• Type
Compatible Cameras
Please reference to compatible camera models
Guide No.
36 (m ISO 100)
(1/1 output @ 105mm)
Flash Coverage
24 to 105mm
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 270°
horizontally and -7° to 90° vertically
Flash Duration (t0.1)
1/350 to 1/20000 seconds
• Exposure Control
Exposure control system
TTL autoflash and manual flash
Flash exposure
Manual. FEB: ±3 stops in 1/3 stop increments
compensation (FEC)
(Manual FEC can be combined.)
Sync mode
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Multi flash
Provided (up to 90 times, 90Hz)
• Wireless Flash (2.4G radio transmission)
Wireless flash function
Master, Slave, Off
Controllable slave groups
3 (A, B and C)
≤30m
Transmission range
(approx.)
Channels
16 (1~16)
- 45 -
• Auto Focus Assist Beam
Effective range (approx.)
Center: 0.6~4m
Periphery: 0.6~2.5m
• Power Supply
AA batteries
Ni-MH batteries (recommended) or 2*LR6 alkaline batteries
Recycle time
Approx. 0.1-2.2 seconds (eneloop Ni-MH batteries of Panasonic).
Red LED indicator will light up when the flash is ready.
Full power flashes
Approx. 210 (2500mA Ni-MH batteries)
Power saving
Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as slave)
• Sync Triggering Mode
Hotshoe, optic triggering
• Dimensions
W x H x D
140*62*38 mm
Weight without battery
200g
- 46 -
Advertisement
Table of Contents
