Table of Contents
Advertisement
2
Previously run the cables from the wall or ceiling through the cable access hole.
3
Mount the attachment plate onto the mount bracket.
Recommended tightening torque: 0.78 N·m
Note:
• For wall mounting:
Installation shall be performed in such a manner that " TOP" of the attachment plate faces
upward. (Except for the case of connecting the conduit from the top. (☞ page 19))
• For ceiling mounting:
The front side (model number indication face) of the camera shall be aligned in the direction of
the arrow in " FRONT" on the attachment plate.
• Ensure that any one of the arrows on the mount bracket is aligned with the arrow of " TOP" on
the attachment plate.
18
Attachment plate
Advertisement
Table of Contents
