JVC GR-DVP7EA Instructions Manual page 40

40
EN
Wipe or Fader works when video recording is started
or stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set "v WIPE/FADER" to the desired mode.
( pg. 38)
● The selected effect indicator appears.
WIPE/FADER
Indicator
— OFF
FADER–WHITE
FADER–BLACK
FADER–B.W
WIPE – CORNER
WIPE – WINDOW
WIPE – SLIDE
WIPE – DOOR
WIPE – SCROLL
WIPE–SHUTTER
Parameter
Disables effects.
Fade in or out with a white screen.
Fade in or out with a black screen.
Fade in to a colour screen from a black and white screen, or fade
out from colour to black and white.
Wipe in on a black screen from the upper right to the lower left
corner, or wipe out from lower left to upper right, leaving a black
screen.
The scene starts in the centre of a black screen and wipes in
toward the corners, or comes in from the corners, gradually wiping
out to the centre.
Wipe in from right to left, or wipe out from left to right.
Wipe in as the two halves of a black screen open to the left and
right, revealing the scene, or wipe out and the black screen
reappears from left and right to cover the scene.
The scene wipes in from the bottom to the top of a black screen, or
wipes out from top to bottom, leaving a black screen.
Wipe in from the centre of a black screen toward the top and
bottom, or wipe out from the top and bottom toward the centre
leaving a black screen.
RECORDING MENUS (cont.)
5
Press the Recording Start/Stop Button to start or
stop recording. The selected Fade-in/out or
Wipe-in/out effect works.
To deactivate the selected effect...
Select "OFF" in step 4.
NOTES:
● You can select other effects for " v WIPE/FADER"
during recording.
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
Description
( : Factory-preset)