Using The Camcorder As A Webcam - JVC GR-DVP7EA Instructions Manual

Using The Camcorder As A
WebCam
This camcorder can be used as a WebCam via USB
connection.
To USB
connector
USB-equipped PC
* When connecting the cable, open the cover.
VIDEO/MEMORY
Switch
Connector Cover*
To USB
USB cable
(provided)
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
3
Set the VIDEO/MEMORY Switch to "MEMORY".
4
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
5
Turn on the PC.
● "Web CAMERA" appears on the screen.
● If the PC is not
powered on, the
camcorder does not
enter the Web
Camera mode.
6
When finished, turn
off the PC first, then
the camcorder.
Disconnect the USB cable from the camcorder
and PC.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. ( pg. 11)
● Use the provided software PIXELA ImageMixer to
capture video in real time.
● You can also use the camcorder for web
conference by using Microsoft Windows
®
NetMeeting and signing up for MSN Hotmail.
● In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, the
Recording Start/Stop Button.
Refer to the instruction manuals of the PC and
provided Software.
79
EN
W W e e b CAMERA b CAMERA
®