Re-Registering The Handset - Panasonic KX-TG5456S Operating Instructions Manual

1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to "Set base unit", then press
{SELECT}.
4
Scroll to "Interrupt tone", then
press {SELECT}.
5
Press {V} or {^} repeatedly to select
the desired setting.
6
Press {SAVE}, then press {OFF}.
Base unit Talking Caller ID
You can turn the Talking Caller ID feature
(page 26) on or off for the base unit.
This feature must be set by using the
handset.
1
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to "Set base unit", then press
{SELECT}.
4
Scroll to "Talking CallerID", then
press {SELECT}.
5
Press {V} or {^} repeatedly to select
"On" or "Off".
6
Press {SAVE}, then press {OFF}.
For assistance, please visit http://www.panasonic.com/consumersupport
Programmable Settings

Re-registering the handset

If "No link to base. Move closer
to base, try again." is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L Make sure the base unit is not being
used.
L Have the handset and base unit near
each other when re-registering the
handset.
1
Handset:
Press {MENU} (middle soft key).
2
Scroll to N, then press {SELECT}.
3
Scroll to "Registration", then press
{SELECT}.
4
Base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
5
Handset:
Press {OK} (right soft key), then wait
until the handset beeps.
L Registration is complete.
43