Re-Registering The Handset - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-7E 02.6.4 3:44 PM ページ 91

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base
unit of the same model, you need to register it to that base unit. The
handset will be given a new extension number of that base unit. Only one
handset can be registered at a time. Make sure the base unit and the
other handsets are not being used. Registration must be completed
within 1 minute.
If you have cancelled the handset registration at the previous base unit
(p. 90), start from step 5.
1 Handset: Press
2 Scroll to "Initial setting" by pressing
(›) (‹)
or , and press
3 Scroll to "Registration" by pressing
(‹)
or , and press
(fl)
4
Press at "HS registration".
5 Base unit:
(MUTE).
Press
≥The MUTE indicator light flashes.
6
Handset:
1 Press the right soft key (
2 Wait until a long beep sounds and the
display shows the registered number.
The registration will then be complete.
≥The registered number "[1]" to "[8]" is shown on
the top right of the display.
≥You can stop registration by pressing (OFF) on the
handset and pressing (MUTE) on the base unit.
If you have not cancelled the handset registration at the previous base unit
(p. 90), the handset number still remains on that base unit memory. To erase
the handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG2730CS base unit: (1) press (PROGRAM), (2) press
(MUTE), (3) enter "335#", and (4) enter that handset number ((1) to (8)).
(CONF/FUNCTION)
.
(fl)
.
(›)
(fl)
.
).
OK
Copy directory
Initial setting
1
2Way radio mode
Set base unit
Registration
1
Change language
---------------
HS registration
1
Deregistration
Press MUTE on
base unit, then
OK on handset to
register handset
O K
[ - ]
SP PRIVACY
Handset
Registering
e.g. Extension number 2
[ 2 ]
SP PRIVACY
Handset [2]
Registered
91