(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC ID: XKS-SM1xSR IC: 8376A-SM1XSR FCC ID: QOQWT32I IC: 5123A BGTWT32I SM1P-Ex Technical Information...
Page 3
For most recent Declaration of Conformity, please visit www.sensear.com/support/declaration-of-conformities SM1P-Ex Technical Information...
Non-Intrinsically Safe Intrinsically Safe 2650 mAh Lithium Polymer, 2250 mAh Lithium-ion, Battery type rechargeable rechargeable Battery charge time 7 hours 4 hours Operating time 24 hours 18-24 hours Housing PP, ABS + TPE Material RoHS Compliant SM1P-Ex Technical Information...
Page 5
NRR AND SLC80 The SM1P-Ex has been certified to international hearing protection standards including AS/NZS 1270:2002, ANSI S3.19-1974, ANSI S12.6- 2008,EN352-1, EN352-3,EN352-4, andEN352-6. The following passive attenuation ratings were observed: PASSIVE ATTENUATION (ANSI S3.19-1974) SM1P-Ex measured in accordance with ANSI S3.19 -1974.
Page 6
PASSIVE ATTENUATION (ANSI S12.6–2008) SM1P-Ex measured in accordance with ANSI S12.6 - 2008. Headband mount- SM1PBEXxx Frequency (Hz) 1000 2000 4000 8000 NRR(SF) 21.4 21.9 29.8 33.7 35.8 37.2 38.5 Mean attenuati o n (dB) Standard 27 dB devi a t i o n(dB) APV80 18.9...
Page 7
PASSIVE ATTENUATION (AS/NZS 1270:2002) SM1P-Ex measured in accordance with AS/NZS 1270:2002. Headband mount- SM1PBEXxx Frequency (Hz) 1000 2000 4000 8000 (80) Mean 20.3 21.7 30.3 33.2 35.2 36.6 37.3 attenuation(dB) Standard 31dB, deviation(dB) Class 5 Mean atten. – 16.0 18.6 27.6...
Page 8
PASSIVE ATTENUATION (EN352-1 AND EN352-3) SM1P-Ex measured in accordance with EN352-1 and EN352-3. Headband mount- SM1PBEXxx (EN352-1) Frequency (Hz) 1000 2000 4000 8000 (dB) Mean attenuation (dB) 22. 24.5 31.5 34.9 35.8 38.0 39.8 Standard deviation (dB) Mean attenuation –...
Page 9
The SM1P-Ex has level dependent facilities and the criterion levels as defined in EN352-4 are displayed below: Model dB(A) SM1P-Ex 108.6 104.6 103.4 TWO-WAY RADIO INPUT (EN352-6) SLC [80] NRR[SF] ANSIS3.19-1974 AS/NZS 1270:2002 EN352-1 andEN352-3 ANSIS12.6–2008 Australia US & Canada...
The output of the level-dependent circuit of this hearing • protector may exceed the daily limit sound level. This limit can be adjusted with a Sensear programming tablet. This headset has been tested and approved according to the • methods described in the EN352 series of standards.
CLAMPING FORCE The clamping force of the SM1P-Ex has been measured in accordance with AS/NZS 1270 Initial Post-flex Model Part # Units measurements measurements SM1P-Ex- SM1PBXXX Newtons 11.6 11.1 11.1 11.1 10.7 11.1 Headband & SM1BBXXX mount Pounds (lbs) SM1P-Ex- 14.2...
Page 12
INTRINSICALLY SAFE CERTIFICATION – Ex MODEL The SM1P-Ex meets the following international standards for use in explosive gas environments: II 2G Ex ib IIC T4Gb(-20 C ≤ Ta ≤ +40 II 2D Ex ib IIIC T155 C Db (-20 C ≤ Ta ≤ +40 I M2Ex ibI Mb(-20 C ≤...
Whilst Sensear Pty Ltd makes every effort to ensure that the information in this document is correct at the time of publication, users and potential users should first check with Sensear Pty Ltd to ensure that they have received the most up-to-date documentation.
Page 14
Waste (Disposal) of your Electronic and Electric Equipment European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive The European Union’s WEEE directive requires that products sold into EU countries must have the crossed- out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste.
Page 15
La direttiva de la Unione Europea (EU) sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE) Ladirettiva RAEEdellaUnione Europea richiedecheiprodottivendutineipaesi della UEdebbanoesseremarcaticonil simbolodiuncontenitoredispazzaturamobilebarratosulprodotto(oincasi eccezionalisull’imballaggio).Ilsimbolo di uncontenitoredi spazzatura mobile barrato, conforme alla direttiva RAEE, significachiiclientieidetentorifinalinei paesidellaUE,nondovrebberosmaltire gliapparecchiogliaccessori elettronici edelettrici coninormali rifiutidomestici. I clienti oidetentorifinalinei paesi della UEdovrebberorivolgersi alfornitore,rappresentanteocentrodi riparazione localeperottenere informazionisuisistemipredispostinel propriopaeseper laraccolta ditaliapparecchiusati.
Need help?
Do you have a question about the SM1P-Ex and is the answer not in the manual?
Questions and answers