Sensear SM1P Quick Start Manual

Hide thumbs Also See for SM1P:

Turn On

Press the power button on the right-hand side of the unit. You will hear the welcome

message 'Sensear, Sounds Good To Me' The green light on the right-hand side of the unit

will begin to flash slowly. You are in SENS Mode – Speech Enhancement Noise

SM1P / SM1P IS

Suppression.

Press and hold the power button on the right-hand side of the unit. You will hear the shut

down tones.

Press the plus (+) or minus (-) sign button on the right-hand side of the unit. For the

highest volume continue to press the plus (+) button until you hear a double beep. The

unit limits ear noise exposure to 82dB(A)

To switch between SENS and passive or quiet mode press the power button once you

have turned on the unit. The green light on the right-hand side of the unit will flash

intermittently in SENS mode and quickly in passive or quiet mode. In quiet mode SENS

audio will be muted.

For wired headsets turn the unit on. Connect the 2-way radio by using the cable provided

and turn the radio on. Push to talk functionality can be used by pressing the push to talk

button on the supplied radio cable.

Table of Contents

Do you have a question about the SM1P and is the answer not in the manual?

Page 1 Press the power button on the right-hand side of the unit. You will hear the welcome message ‘Sensear, Sounds Good To Me’ The green light on the right-hand side of the unit will begin to flash slowly. You are in SENS Mode – Speech Enhancement Noise SM1P / SM1P IS Suppression.
Page 2 Enter connectivity settings on your Bluetooth device and under Bluetooth search for new devices. Once the search is complete select ‘Sensear SM’ to connect. The pair is complete once you hear a bell tone in the headset. Tip: Calls can be answered, or ended, on the device or via the multi function button on the headset.

Sm1p is