Advertisement
Basic Call Features
Placing Calls
To place a call directly:
1.Do one of the following:
Enter the desired number when the handset is idle.
Press
to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line soft
key to select the desired line. If you do not select a line, the handset uses the default
outgoing line to dial out.
2.Press
,
or
To place a call from the local directory:
1.Press
when the handset is idle.
2.Press
or
the default line.
If multiple numbers for the contact are stored, press
number, and then press
To place a call from the call history:
1.Press the History soft key when the handset is idle, and then select the desired call history
list.
2.Press
or
the default line.
To place a call from the redial list:
1.Press
or
2.Press
or
To place a call using the speed dial key:
Long press the speed dial key to place a call to preset number directly.
to dial out.
to highlight the desired entry, and then press
or
to highlight the desired entry, and then press
when the handset is idle.
to highlight the desired entry, and then press
again to dial out using the default line.
or
to dial out using
or
to highlight the desired
or
to dial out using
or
.
8
Advertisement
