Samsung ProXpress M456x Series Service Manual page 156

4. Troubleshooting
SFE Description
Code
003 confidential
006 The device supports only user's own email address for scan to email.
007 [PCL6] The device prints as original 1 dot line without 2 dot line compensation.
008 [PCL5] The device ignores paper size command in PRN and prints as paper size in tray.
009 PJL readback response is changed with HPOS.
1) Add <CR><LF> to EOJ response.
2) No EOJ job but EOJ response occurs.
3) Device uses Job name instead of EOJ name.
010 Maximum value of 'Power save time' is increased as 240 min.
012 If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.
013 The device ignores the USB memory stick and detects only card reader.
014 When the authenticated user uses scan to email, user's email address is added automatically.
015 The device supports to connect to LDAPs server without any certificate.
016 The device fits image appearance in report page
018 The device blocks apk installation.
019 User ID is not case-sensitive for login
020 confidential
023 The device rotates copy output 180 degrees when executed on flatbed.
025 confidential
026 The device maintains HDD encryption as a default.
029 The device support 3 digit password for SMB
031 The device shall store confidential/store print without image processing.
(If this SFE option is enabled, the device shall not execute emul image processing and just store prn data. At
release time the device shall execute image process. So the some detail information of job shall not be shown in
job status such as total pages and printing options.)
032 The device shall print line even though that has less than 1 dot.
(If this SFE option is enabled, the image processor shall not omitt line that is less than 1 dot. By PCL 6 command
rule, the device shall not print less than 1 dot line. But this SFE is enabled, the device shall print it.)
033 The device shall draw Letter Gothic font as previous thickness.
(If this SFE option is enabled, the image processor shall draw Letter Gothic font as previous thickness(Bitstream)
thicker than URW++. )
035 The device shall provide auto scale for A3/Leger to A4/Letter in case of A4 Models that doesn't support A3/Ledger
size.
054 Keep Jam animation pop-up
(If this SFE is enabled, UI shall keep jam animation pop-up until error is cleared.)
055 Keep paper setting as No. 10 envelope
(If this SFE is enabled, the system shall maintain the paper settings as No.10 envelope even though detected
size is statement.)
056 Support duplex borderless printing
(If this SFE is enabled, the system shall print with 0 margin for left and right. In top and bottom, the system
shall apply 2mm margin.)
4-46 Copyright© 1995-2017 SAMSUNG. All rights reserved.