Configure The Dhcpv6 Server Address Type - TP-Link VX230v User Manual

Chapter 6
Do not select the
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type
a specific IPv6 site prefix, select
3 ) Keep WAN Connection
4 Click Save to make the settings effective.
6 2 2

Configure the DHCPv6 Server Address Type

1 Visit http://tplinkmodem.net
set for the modem router.
2 Go to Advanced
3 Select IPv6 to configure IPv6 LAN parameters.
1 ) Select DHCPv6 Server
addresses to hosts.
2 ) Specify the Starting/Ending IPv6 Address
generate IPv6 addresses within the specified range.
3 ) Keep Address Lease Time
4 ) Keep Site Prefix Type
specific IPv6 site prefix, select
5 ) Keep WAN Connection
4 Click Save to make the settings effective.
Enable RDNSS and Enable ULA Prefix
as the default setting Delegated. If your ISP has provided
Static
as the default settings.
or http://192.168.1.1, and log in with the password you
> Network > LAN Settings.
as the address type to make the router assign IPv6
as the default setting.
as the default value Delegated. If your ISP has provided a
Static
as the default setting.
Customize Your Network Settings
check boxes unless required by your ISP. Otherwise
and enter the prefix.
for the IPv6 suffixes. The router will
and enter the prefix.
44