Table of Contents
Advertisement
Chapter 6
4
Enter the
MAC Address
5
Specify the
IP address
6
Select the
Enable This Entry
6 1 5
Condition Pool
Condition Pool is used to configure IP address pools for certain devices or is used under
the guidance of your device provider. The table displays the corresponding parameters
of all the condition pools.
Follow the steps below to add a condition pool.
1
Visit
http://tplinkmodem.net
set for the modem router.
2
Go to
Advanced
3
Click Add.
4
Give a description to the condition pool in the
5
Enter a value to identify the
6
Enter the
Starting/Ending IP Address
server can assign to clients.
of the device for which you want to reserve IP address.
which will be reserved by the router.
check box and click
or http://192.168.1.1, and log in with the password you
>
Network
>
LAN Settings
Vendor ID
Customize Your Network Settings
OK
to make the settings effective.
page, and select IPv4.
Device Name
and functionality of the DHCP client.
to decide the IP address range the DHCP
field.
42
Hide quick links:
Advertisement
Table of Contents
