Configure The Dhcpv6 Server Address Type - TP-Link Archer C5 User Manual

Chapter 11
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
1 ) Select RADVD
prefixes to hosts.
Note:
Do not select the
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
2 ) Keep Site Prefix Type
a specific IPv6 site prefix, select
3 ) Keep WAN Connection
4. Click Save to make the settings effective.

11. 2. 2. Configure the DHCPv6 Server Address Type

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
> Network > LAN Settings.
as the address type to make the router assign IPv6 address
Enable RDNSS and Enable ULA Prefix
as the default setting Delegated. If your ISP has provided
Static
as the default settings.
> Network > LAN Settings.
Customize Your Network Settings
check boxes unless required by your ISP. Otherwise
and enter the prefix.
64