TP-Link VX230v User Manual page 10

Chapter 1
Some Common LEDs Explanation
LED
(Power)
(DSL)
(Internet)
(2.4GHz Wireless)
(5GHz Wireless)
(WPS)
(WAN)
(LAN)
(PHONE)
Status
On The system has started up successfully.
The system is starting up or the firmware is being upgraded. Do
Flashing
not disconnect or power off your router.
Off Power is off.
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
Off DSL synchronization failed.
On Internet service is available.
Off The router's WAN port is unplugged.
On The 2.4GHz wireless band is enabled.
Flashing The router is transmitting or receiving data via 2.4GHz band.
Off The 2.4GHz wireless band is disabled.
On The 5GHz wireless band is enabled.
Flashing The router is transmitting or receiving data via 5GHz band.
Off The 5GHz wireless band is disabled.
Turns on when a WPS synchronization is established and
On/Off
automatically turns off about 5 minutes later.
A wireless device is trying to connect to the network via WPS.
Flashing
This process may take up to 2 minutes.
On A device is connected to the WAN port.
Flashing The WAN port is sending or receiving data.
Off No device is connected to the WAN port.
On A device is connected to the LAN port.
Flashing The LAN port is sending or receiving data.
Off No device is connected to the LAN port.
On The SIP account is registered successfully.
Flashing
The phone is on-hook and there are voice messages.
Slowly
Flashing
The phone is ringing.
Quickly
Off No SIP account is registered.
Get to Know About Your Modem Router
Indication
5