Table of Contents
Advertisement
NLTroubleshooting
Malfunction
burns.
flashes.
All other error codes.
"E:30/-20"
Device not working.
Program does not start.
48
Cause and Troubleshooting
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 35
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 28
Door is not closed.
Close the door.
1.
To start the program, press
2.
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press
4.
Malfunction
Please contact customer service.
▶
→
"Customer Service", page 58
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 58
Detergent dosage is too high.
When dosing manually, reduce the amount of
▶
detergent for the next wash with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
The fuse in the fuse box has tripped.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
was not pressed.
Press .
▶
Door is not closed.
Close the door.
1.
.
.
Advertisement
Table of Contents
