Table of Contents
Advertisement
NLCleaning and maintenance
Install the pump cover.
4.
Check that the pump cover
s
components are correctly
assembled.
Tighten the pump cover as far as
5.
it will go.
90°
The pump cover handle must
be vertical.
44
Install and close the service door.
6.
2
1
Before the next wash
To prevent unused detergent from
flowing into the drain during the next
wash, run a suitable draining program
after emptying the pump.
Open the water tap.
1.
Plug in the mains plug.
2.
Switch on the device.
3.
Put one liter of water in the manual
4.
dosing compartment.
Select a suitable program for
5.
draining.
→ "Programs", Page 28
Advertisement
Table of Contents
