Related Manuals for Bosch WAU28P50NL
Summary of Contents for Bosch WAU28P50NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WAU28P50NL [NL] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 6 Before using for the first time ....20 1.1 General instructions ....4 6.1 Starting a wash cycle without 1.2 Destination of the device laundry..........20 rate ........ - Page 3 15 Intelligent dosing system ..35 15.1 Starting the program with the intelligent dosing system ... 35 15.2 Filling the dosing container ..36 15.3 Contents of the dosing reservoir........37 15.4 Basic dosing quantity ..37 16 Basic Settings ....39 16.1 Overview of the basic settings ........
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto wash machine-safe textiles and wool by hand... -
Page 5: Secure Installation
SafetyNL 1.4 Secure installation WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
-
Page 7: Safer Use
SafetyNL If the appliance is moved by protruding parts, such as the loading door, the parts can break off. ▶ Do not move the appliance by protruding parts. CAUTION ‒ Risk of cutting! Sharp edges on the device can cause cuts if touched. ▶... - Page 8 NLSafety ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes. WARNING ‒ Risk of suffocation! Children can inhale or swallow small parts and choke.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶ Do not touch the hot soapy water. CAUTION ‒ Risk of chemical burns! When opening the detergent drawer, detergent and care products may splash out of the appliance. - Page 10 NLSafety WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used. ▶ Do not use solvent-based cleaning agents.
-
Page 11: Avoiding Material Damage
Avoid material damageNL Make sure that the thread length ▶ 2 Material damage on the connection to the water avoid tap is at least 10 mm. Water pressure that is too low or too high can interfere with the appliance function. PAY ATTENTION! Incorrect dosage of fabric softeners, Make sure that the water pressure... -
Page 12: Environmental Protection And Saving
NLEnvironmental protection and saving ▶ Remove all detergent residues, spray Reduce washing temperature for mist residues or residues immediately lightly and normally soiled laundry. upon contact with the appliance. aAt low temperatures, it consumes device less energy. For light to normal soiling, lower 3 Environmental protection and temperatures than those stated on... -
Page 13: Energy Saving Mode
Set up and connectNL 3.3 Energy Saving Mode 4.2 Package contents If you do not operate the device for a After unpacking, check all parts for long time, it automatically switches transport damage and the to energy-saving mode. completeness of the delivery. The energy saving mode is exited PAY ATTENTION! Use with incomplete or defective... -
Page 14: Removing Transport Locks
NLSet up and connect installation site WARNING To demand Risk of injury! kitchen The device al- When used on a plinth, the device can borrow under a tip over. continuous work The device feet for commissioning ▶ place sheet, on a plinth must be absolutely that fixed with the with the fixings adjacent... - Page 15 Set up and connectNL Loosen and remove all bolts of the 4 Install the 4 cover caps. transport locks with a SW13 open- end wrench Slide the 4 cover caps downwards. Remove the mains connection cable from the holder. Remark:To install the transport locks in the machine, reverse these steps in reverse order.
-
Page 16: Connecting The Device
NLSet up and connect Remark:Observe the pumping 4.5 Connecting device heights. Connect water supply hose The maximum pumping height bed Connect the water supply hose to the appliance. The connection position tie with a hose clamp (24-40 mm) bore gene. washbasin the water drainage feeding hose with... -
Page 17: Adjusting The Device
Set up and connectNL Tighten the lock nuts against the 4.6 Adjusting the device housing with an open-end wrench To reduce noises and vibrations and to SW17 hand-tight. prevent the device from walking, place the device horizontally. Loosen the lock nuts with a SW17 open-end wrench. -
Page 18: Getting To Know Your Device
NLGetting to know your device 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color the vor Service valve n pump Transport protections →... -
Page 19: Control Panel
Getting to know your deviceNL Manual Dosing Compartment / : dispenser for fabric softener or liquid detergent : dispenser for liquid detergent 1 2 3 5.3 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. -
Page 20: Before Using For The First Time
NLusage change or deactivate it by pressing Approx. Pour 1 liter of tap water into the corresponding button on the the manual dosing compartment. display again. PAY ATTENTION! Violent action on the display may cause damage. ▶ Do not exert strong pressure on the display. - Page 21 usageNL Start the first wash cycle or press to switch off the appliance. → "The Ministry in Essence", Page 33...
-
Page 22: Display
NLDisplay 7 Display The display shows the current setting values, options or information texts. Example display indication name Display More information 0:40 Expected program duration or remaining Program duration / remaining time of time of the program in hours and minutes. the program →... - Page 23 DisplayNL name Display More information Energy consumption for the set Energy consumption programme. : lower energy consumption : higher energy consumption Water consumption for the set water consumption program. : lower water consumption : higher water consumption Signal Basic setting Key signal Basic setting Basic setting...
- Page 24 NLDisplay name Display More information voltage control Flashing: The automatic voltage control system detects impermissible lesson system undervoltage. The program pauses. Remark:The program will continue when the voltage is allowed again. voltage control Flashing: The program has been paused due to illegal undervoltages. The voltage is lesson system allowed again and the program continues.
- Page 25 TestsNL 8 Keys The selection of the program settings depends on the program set. Knob Choice More information (Start/Pause) sstart Start, cancel or pause program. sCancel spause speed sactivate Activate or deactivate reduced program duration. sdeactivate Remark:The energy consumption is higher.
- Page 26 NLTests Knob Choice More information - 1400 - 1400 Adjust the spin speed or deactivate the (Spin) spin. Set spin speed in rpm. The selection drains the water and deactivates the spin cycle. The laundry remains wet in the drum. (mains switch) sSwitch Turn the device on or off.
- Page 27 TestsNL Knob Choice More information sactivate Activate or deactivate washing with less (Anti wrinkle) crease. sdeactivate To reduce creasing in the laundry, the spin process and spin speed are adjusted. The laundry is so damp after washing that it hangs out well on the washing line.
-
Page 28: Programs
NLPrograms 9 Programs Remark:The care labels on the laundry give you additional information on program selection. Max. Program Description bela- thing (kg) Cotton Wash hard-wearing cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate Speed. Program setting: smax. - Page 29 ProgramsNL Max. Program Description bela- thing (kg) Fast mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics. Suitable for lightly soiled laundry. Program setting: smax. 60 °C smax. 1400 rpm Delicate silk Wash delicate, washable textiles made of silk, viscose and synthetics.
- Page 30 NLPrograms Max. Program Description bela- thing (kg) smax. 1400 rpm Wash sports and leisure textiles made of synthetic, Sport microfibre and fleece. Use a detergent for sports textiles. Do not use fabric softener. Tip:Wash heavily soiled laundry with the Easy- Care programme.
- Page 31 ProgramsNL Max. Program Description bela- thing (kg) Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use wool, delicate or liquid detergent. Remark:If you have not used a program with a 60°C or higher temperature for a long time, the drum cleaning indicator flashes as a reminder.
-
Page 32: Accessories
NLaccessories 10 Accessories Use only original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → "Customer Service", page 58 . Usage Order number Cold water or Aquastop WMZ2381 Extension water supply water supply hose feeding hose lengthen (2.50 m). -
Page 33: Detergent And Care Ginger
Detergent and laundry care productNL Turn the program selector and set 12 Detergent and detergent it to the desired programme. → "Programs", Page 28 care product If desired, adjust the program settings. Information from the manufacturer about → "Adjust program settings", page use and dosage can be found on the packaging. -
Page 34: Laundry
NLService Remark:To overwrite the saved Fill with detergent. → program, repeat the steps. "Detergent drawer", Page 18 Fill with detergent if desired. 13.5 Filling the drum with Slide the detergent drawer into the laundry appliance. Remark:To avoid creasing, observe the 13.7 Starting the program maximum load of the programs. -
Page 35: Program Cancel
Child lockNL 13.9 Program Cancel 14 Child Lock Press. Secure your device against unwanted Open the appliance door. operation via the controls. At high temperature and high water level, the appliance door remains locked for safety reasons. 14.1 Activating child lock –... -
Page 36: Filling The Dosing Container
NLIntelligent dosing system container for manual dosing. If desired, the contents of the → "Dosing detergent and care agent", dosing containers → Page 37 To Page 34 adjust. If you want to dose manually for a set If desired, the basic dosing amount →... -
Page 37: Contents Of The Dosing
Intelligent dosing systemNL 15.3 Content of the dosing Open the filling cover. container Comments sWhen you view the contents of the If the dosing reservoir changes, the basic dosing for this dosing reservoir is reset. sWhen you use both dosing containers for liquid detergents, you must select a dosing container to be used during washing. - Page 38 NLIntelligent dosing system Remark:To adjust the basic dosing amount for, repeat the steps with i- DOS.
-
Page 39: Basic Settings
Basic settingsNL 16 Basic Settings You can configure the basic settings of your device according to your needs. 16.1 Overview of the basic settings Symbol Description Basic setting Where the ling Signal 0 (off) Adjust the volume of the signal 1 (soft) after the program has ended. -
Page 40: Changing Basic Settings
NLCleaning and maintenance Symbol Description Basic setting Where the ling program count Display the number of programs that have ended. Example 16.2 Changing basic settings 17.2 Cleaning the detergent drawer To set the basic settings, press the If you want to replace liquid detergent button. - Page 41 Cleaning and maintenanceNL Remove the pump unit. Clean the pump unit with a damp cloth. Unlock and remove the detergent drawer lid. Clean the detergent drawer and lid with a soft, damp cloth or hand shower. Empty the detergent drawer. Insert the detergent drawer, dry the lid and the pump unit and install.
-
Page 42: Cleaning The Drain Pump
NLCleaning and maintenance Open and remove the service door. Clean the housing of the detergent drawer in the appliance. Place a sufficiently large container under the opening. Slide the detergent drawer into the appliance. Remove the drain hose from the holder. 17.3 Cleaning the drain pump Clean the drain pump in the event of malfunctions, e.g. - Page 43 Cleaning and maintenanceNL Cleaning the drain pump CAUTION - Risk of burns!The soap gets hot when washing at high Required:The drain pump is empty. → Page 42 temperatures. As there may still be residual ▶ Do not touch the hot soapy water. water in the pump, carefully Pull off the sealing cap to allow the unscrew the lid.
- Page 44 NLCleaning and maintenance Install the pump cover. Install and close the service door. Check that the pump cover components are correctly assembled. Before the next wash To prevent unused detergent from flowing into the drain during the next Tighten the pump cover as far as wash, run a suitable draining program it will go.
-
Page 45: Troubleshooting
TroubleshootingNL 18 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction "E:36 / -10" When dosing manually, reduce the amount of ▶ detergent for the next wash with an equal load. Unauthorized extension mounted on the water drain hose. Remove any unauthorized extensions from the ▶ water drain hose.
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Open the water tap. "E:30 / -10" and/or ▶ Water supply hose is kinked or pinched. Make sure that the water supply hose is not ▶ kinked or pinched. Water level measuring system defective. Remark:With the error message, the device starts a pump-down procedure.
- Page 48 NLTroubleshooting Cause and Troubleshooting Malfunction burns. Temperature is too high. Wait for the temperature to drop. ▶ → "program cancel", Page 35 ▶ Water level is too high. Select a suitable program for draining. ▶ → "Programs", Page 28 flashes. Door is not closed.
- Page 49 TroubleshootingNL Cause and Troubleshooting Malfunction To start the program, press Program does not start. Child lock is activated. → "Deactivate child lock", page 35 ▶ / is activated. Check if / is activated. ▶ → "Buttons", Page 25 Laundry is wedged in the door. Open the door again.
- Page 50 NLTroubleshooting Cause and Troubleshooting Malfunction Door cannot be Open the door with the emergency release. ▶ → "Emergency release", page 57 opened. Drain pipe or water drain hose is clogged. Washing water is not pumped out. Clean the drain pipe and the water drain hose. ▶...
- Page 51 TroubleshootingNL Cause and Troubleshooting Malfunction No water flows into was not pressed. the device. The Press . ▶ detergent was not The strainers in the water supply are clogged. washed in. ▶ Clean the strainers in the water supply. Water tap is closed. Open the water tap.
- Page 52 NLTroubleshooting Cause and Troubleshooting Malfunction Vibration and movement Secure the device feet. of the ▶ → "Adjusting the device", Page 17 device during the centrifuge Transport protections have not been removed. run. → "Remove transport locks", page 14 . ▶ Load recognition is active.
- Page 53 TroubleshootingNL Cause and Troubleshooting Malfunction Program centrifugal Drain pipe or water drain hose is kinked or pinched. run does not start. Make sure that the drain pipe and the water ▶ drain hose are not kinked or pinched. The unbalance detection system has interrupted the spin cycle due to uneven distribution of the laundry.
- Page 54 NLTroubleshooting Cause and Troubleshooting Malfunction wrinkling. Inappropriate program set for the type of fabric. Select a suitable program for the type of fabric. ▶ Spin result is Low spin speed is set. not to satisfaction- Set a higher spin speed for the next wash. ▶...
- Page 55 TroubleshootingNL Cause and Troubleshooting Malfunction Detergent residue on Empty the dosing containers. → "Cleaning the detergent drawer", Page the damp laundry. Clean the dosing containers. Refill the dosing containers. → "Filling the dosing container", page 36 Basic dosing amount not set correctly. When the intelligent dosing is activated, reduce the ▶...
- Page 56 NLTroubleshooting Cause and Troubleshooting Malfunction Insufficient cleaning Unsuitable detergent has been placed in the dosing next operation. container of the intelligent dosing system. Check whether the detergent used is suitable. → "Detergent and care agent", Page 33 Empty the dosing containers. →...
-
Page 57: Emergency Release
Transport, storage and disposalNL 18.1 Emergency release 19.2 Installing transport locks unlock door To avoid transport damage, secure Required:The drain pump is empty. → Page 42 the device with transport locks before transport. 1. ATTENTION!Running water can Remove the 4 cover caps using a lead to material damage. -
Page 58: Disposal Of Your Old
NLcustomer service 19.4 Disposal of your old chemical equipment (waste electrical and electronic device equipment - WEEE). Environmentally friendly disposal The directive sets the allows valuable raw materials to be framework for the take- reused. back valid in the EU and disposal of old appliances. - Page 59 customer serviceNL son the inside of the bottom holding valve. son the back of the device honeycomb. In order to quickly find your device data and the service telephone numbers, you can write down the data.
-
Page 60: Consumption Values
NLConsumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. The automatic dosing function has been disabled for this purpose. Notes on the comparative test: deactivate the automatic dosing function, unless this function is the subject of the test. - Page 61 Technical dataNL Device depth 106.3 cm Length of the 150 cm with open water supply door feeding hose Weight 74.5 kg Length of the 150 cm water drain hose Maximum load 9.0 kg Length of the 160 cm thing mains connection cable 220-240V, mains voltage 50-60 Hz...
- Page 64 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001773889* 9001773889(020824)