Table of Contents
Advertisement
SuperStorage SSG-136R-4MU32JBF User's Manual
PCIe Expansion Cards
The SSG-136R-4MU32JBF can accommodate up to two full-height PCIe expansion cards in
the rear slots. These are only used for NVMeoF configurations, 6-host configurations, and
12-host configurations.
Installing an Add-on Card
Begin by removing power from the system as described in Section 3.1 and removing the
cover as described in Section 3.2.
1. Remove the shield for the PCIe slot that you wish to populate. Verify that the card you
are installing is supported by the slot.
2. Seat the card firmly into the slot by pushing down with your thumbs evenly on both
sides of the card.
3. Use a screw to secure the top of the card shield to the chassis. The PCIe slot shields
protect the motherboard and its components from EMI and aid in proper ventilation, so
verify that each unused slot is covered by a shield.
35
Advertisement
Table of Contents
