Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3CNHSM52XXX Series Fan
cETL Model NO. : 3CNHSM52XX
RETAILER NAME:
RETAILER ADDRESS:
4.34 kg
9.55 lbs
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company 3CNHSM52 Series
Summary of Contents for Monte Carlo Fan Company 3CNHSM52 Series
- Page 1 Owner’s Guide and Installation Manual 3CNHSM52XXX Series Fan cETL Model NO. : 3CNHSM52XX Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 4.34 kg 9.55 lbs Total fan weight...
-
Page 2: Cautions And Warnings
Cautions and Warnings WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70) including fire-rated construction. - Page 3 Outlet box Before you begin installing the fan, Switch Before installing this fan make sure the Use metal outlet box suitable for fan power off at Service panel and lock outlet box is properly installed to the support and use only the screws provided service disconnecting means to prevent house structure.
- Page 4 Black Receiver OUTET BOX Power source Ground/ White Green Ground/ Green White Brown Grey Black Blue Make wiring connections using wire connectors provided as indicated above. Brown wire from fan to Brown wire from receiver marked Motor U. Gray wire from fan to Gray wire from receiver marked Motor V. Blue wire from fan to Blue wire from receiver marked Motor W.
- Page 5 Note : For better performance of the remote operation, keep the WIFI antenna apart from the antenna of the receiver. Wi-Fi antenna Fan housing Housing Antenna of receiver Decorative ring Attach housing onto mounting plate, Attach decorative ring by locating the head of set screws on housing with grooves in aligning the keyhole slots on the housing the decorative ring and twist clockwise till tight.
- Page 6 Remote Controller Operation Remove the battery cover from the remote control transmitter and install batteries. Replace the cover. This remote uses 2 1.5V/AAA batteries. Note: If not using for long periods of time, remove the batteries to prevent damage to remote controller, and store the remote controller away from excess heat or humidity.
- Page 7 Install Transmitter wall mount cradle with 2 screws provided. Useful tips: The remote transmitter can be removed by pressing it upward from the lower half. The remote transmitter can be held on magnetic metal materials by a magnet built in the transmitter. The receiver provides the following protective functions: Lock protection: The DC motor has a build-in safety feature Wall mount cradle...
- Page 8 Fan operation with Bond Home APP Download the Bond Home app with your smart devices. The app is available on the Google Play Store and Apple Store. Or get it from bond home link, http://bondhome.io/app Create a new account following on-screen operating steps. Make the fan (Smart by Bond wi-fi...
-
Page 9: Troubleshooting
Troubleshooting or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, installation, please call our Customer Service Center at the number printed on your parts list insert sheet. Warning and lock the service panel to prevent the power from being switched back on accidentally. If the service panel cannot be locked to prevent the power from being switched on accidentally, securely fasten a warning sign to the service panel. - Page 10 Aug.2022...