3
Setting up the display
To set up the display, ensure that the power is turned off to the display, media player/computer
system, and other attached devices, and then follow the instructions below.
Installing the stand (sold separately)
1.
Take the parts for the stand out of the box.
●
HP LD4220tm—Four screws M4 x 32 mm (1.26 in) and stand
Figure 3-1
●
HP LD4720tm—Four screws M4 x 10 mm (0.39 in) and stand
Figure 3-2
6
Chapter 3 Setting up the display
HP LD4220tm—Stand accessory contents
HP LD4720tm—Stand accessory contents
ENWW