3
Setting up the display
To set up the display, ensure that the power is turned off to the display, media player/computer system,
and other attached devices, and then follow the instructions below.
Installing the stand (sold separately)
1.
Take the parts for the stand out of the box.
HP LD4201 and LD4210—Four screws M4 x 32 mm (1.26 in) and stand
●
Figure 3-1
HP LD4710—Four screws M4 x 10 mm (0.39 in) and stand
●
Figure 3-2
6
Chapter 3 Setting up the display
HP LD4201 and LD4210—Stand accessory contents
HP LD4710—Stand accessory contents
ENWW