Setting Up Your Display; Connecting The Cables - HP M900 User Manual

NOTE
HP M900 Monitor User's Guide

Setting Up Your Display

Setting Up Your Display
Where to Place the Display
Place your display on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, and
sources of electromagnetic fields. Sources of electromagnetic fields
include transformers, motors, and other displays.

Connecting the Cables

Before you connect any cables, refer to the safety instructions at the
beginning of this manual and make sure your PC and display are
switched off.
1 Connect the video cable to the video input on the back of your
display. Tighten the thumbscrews on the plug.
2 Connect the video cable (it has a 15-pin plug) to the video outlet on
your PC. Tighten the thumbscrews on the plug.
3 Connect the power cord to the display.
4 Plug the power cord into the power outlet.
3
The location of your PC's video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your PC, if
necessary.
4 English
1
Video cable
2
Video cable
4
Power cords