Environmental Protection - Raider RD-ESH01 User Manual

14.3. TRANSPORT
Turn off the engine and unplug. When transporting, be careful not to drop or otherwise hit the machine.
When transporting, the machine must be secured against sliding and rolling. Do not place objects on the
device.
15. FAULTS AND WAYS TO REMEDY THEM.
The table below shows the symptoms of a malfunction and how you can help yourself if your crusher
stops working properly. If you cannot find and correct the problem by following the instructions in the
table, contact an authorized RAIDER service center. Attention! Before starting the troubleshooting, stop
the branch crusher and unplug it.
Faults
The machine does
not work
The material is not
fragmented
Excessive vibration
/noise/
WARNING! Faults that cannot be solved with the help of this table can be solved by an authorized
service center.
If necessary, it is best to repair your crusher only by a qualified RAIDER repair shop where only
original spare parts are used. This ensures their safe operation.

16. ENVIRONMENTAL PROTECTION.

Do not dispose of used electrical equipment in the household waste! In order to protect
the environment and in accordance with Directive 2012/19 / EC, they must be collected
separately and subjected to appropriate processing for the recovery of the valuable raw
materials contained therein.
Reasons
The locking screw is not fully
tightened
Power is off
Network contact is defective
The extension cable is damaged
The material is too soft
Clogged material
Loose blade bolt
The cutting knife is damaged
Internal damage to the machine
Removal
Tighten the securing screw
Turn on the power
Check the network contact
Check the cable. Replace if damaged
Use a plunger or add dry branches
Remove the clogged material
Tighten the blade bolt
Replace the knife
Check with an authorized service center
21