Raider RD-T11 User Manual page 43

43
Prior to ignition, the direction of the suction and fuel sliders must be in the position indicated. After
ignition, move the suction slider to the right. When completing the tilling operation, switch off the fuel
supply using the lower slider
.
• Before starting the ignition, the right-hand knob must be in the ON position
The front wheel must be pointing downwards for use in transport.
When tilling, mount the wheel so that it points upwards.
ATTENTION !!! ALWAYS CHECK THE ENGINE OIL INSURANCE (SAE30 / M10D) AND SPEED
(TRANSMISSION) BEFORE STARTING THE MOTOR TILL MACHINE! IF THIS IS NO OR YOU
ARE IN QUESTION OF THE QUANTITY AND QUALITY OF THE AVAILABLE, DRAIN IT FROM THE
CORRECT PLUG AND REPLACE WHEN YOU TAKE 900 PERIODICALLY CHANGE THE ENGINE
OIL AS REFERRED TO THE MACHINE INSTRUCTIONS AND THEN IN THE GEARBOX AT LEAST
ANNUALLY!