3.10 AIOM Card
The system supports various AIOM cards to provide networking functionality. See the
Supermicro product page for details about the different AIOM cards.
Removing the AIOM Card
1. Press the release tab and loosen the thumbscrew on the AIOM card.
2. Grasp the release tab and the thumbscrew and pull the AIOM out of the node tray.
Installing the AIOM Card
1. If necessary, loosen the thumbscrew and remove the shield
2. Insert the card into the node until it is connected to the motherboard slot.
3. Tighten the thumbscrew.
Chapter 3: Maintenance and Component Installation
Figure 3-13. AIOM Card Node Position
61
Thumbscrew
Release Tab