Table of Contents
Advertisement
Installation
5. Install a 10-32 standoff
Tighten this standoff.
6. Place the left rear slide bracket on the inside of the left rear rail and align the three
slide bracket holes and with the 1st, 2nd, and 3rd holes of the installation area on the
left rear rail.
7. Install three 10-32 truss-head screws
installation area to secure the left rear slide bracket to the left rear rail, but do not
tighten.
8. Tighten the two 8-32 screws and nuts that secure the left rear slide bracket to the left
slide assembly.
9. Securely tighten all five 10-32 truss-head screws that secure the left slide assembly to
the left front and rear cabinet rails.
10. Install a 10-32 standoff
secure it in place with a 10-32 nut.
2–8 DIGITAL 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide
š
in the 2nd hole of the installation area on the left front rail.
›
in the 1st, 2nd, and 3rd, holes of the
œ
in 14th hole of the installation area on the left front rail and
Advertisement
Table of Contents
Need help?
Do you have a question about the Memory Channel Hub and is the answer not in the manual?
Questions and answers