Uniden BW6101R Series Owner's Manual page 24

6. Please ensure the camera is powered on and is within the range of the router.
Tap "Next" to continue. If the indicator light on the camera is not flashing slowly,
press and hold the reset button with the reset pin for 5 seconds to reset the
camera and set it up within 2 minutes. When the camera is flashing slowly, the
camera is ready to set up tap "Next" to continue.
7. Enter the Wi-Fi password of the selected Wi-Fi network and tap "Next" to
confirm the Wi-Fi name and password. Tap "Ok" to continue. Please note that
the camera only supports 2.4GHz Wi-Fi connection and the Wi-Fi SSID and
password must not exceed 24 characters.
24