Special Features; Remote Viewing Via App - Uniden BW6101R Series Owner's Manual

REMOTE VIEWING VIA APP

You can download Uniden Baby Watch Plus app to remotely view the camera.
To set up the baby monitor camera, please make sure it's successfully installed and
powered on, and that the status indicator on the camera is flashing red slowly.
The flashing RED (slow) status means that your camera is ready to be paired to the
Baby Watch Plus App.
Prerequisites
• You must have an available Wi-Fi-enabled Smartphone (Android or iOS
smartphone).
• The BW610R camera and your smartphone must be within the same Wi-Fi
network range for initial setup (ideally within 3m from the router).
• Wi-Fi router connection is 2.4GHz and password if any.
1. Search and download the free Baby Watch Plus app from the App Store for iOS
devices or Play Store for Android devices. You will need to create an account
specifically for the Baby Watch Plus app. If you already have an account with
Baby Watch Plus app, log in account and skip to Step 5.
2. When the status indicator on the camera starts flashing red slowly, the camera
is ready to be paired with the Wi-Fi network. If the status indicator is not red
or flashing quickly, press and hold the reset button for 5 seconds, wait for the
status indicator to flashing red slowly.
* Please note that app screenshots are for reference only. User Interface for iPhone and
Android Phones might differ in terms of icons layout and functionality and may change
without notice.
As the Baby Watch Plus app is constantly under development to enrich user experience, the icons/
screens shown may vary slightly from the actual app.

SPECIAL FEATURES

21