Table of Contents
Advertisement
How to Use of the Operator Panel
This section explains the names and functions of components on the operator panel.
No.
Name
1
Display screen
2
«ON LINE» button
3
«CANCEL» button
4
«ENTER» button
5
Scroll button
or
6
«BACK» button
7
«HELP» button
8
«POWER SAVE» button
9
Numeric Keypad
10
«Fn» key
Function
Displays operating instructions and the status of the printer.
Switches between online and offline modes.
Cancels the current print immediately.
Confirms the highlighted item.
Selects the menu or scrolls the screen.
Returns to the previous screen.
Displays the help screen. To close, press the «HELP» button,
«BACK» button, or «CANCEL» button.
• Enters or exits the power saving mode.
• Exits the sleep mode.
Lights up green in the power save mode and blinks green in the
sleep mode.
• Enters numbers.
• Enters alphabetical characters and symbols.
A password can be entered only with a numeric keypad.
Displays the equipment setting menu screen with a shortcut
function.
No.
Name
11
«CLEAR» key
12
«READY» indicator
13
«ATTENTION» indicator
14
NFC mark
•
How to Use the Numeric Keypad
•
How to Use the Fn Key
•
Function Menu List
- 18 -
Function
Executes the following actions according to the entered items
when pressed or held down.
• Minimizes a setting value.
• Enters zero for a setting value.
• Deletes a character.
• Cancels the selected item.
Returns to the previous settings. Not available when entering an
IP address.
Lights up green in online mode and turns off in offline mode.
Lights up or blinks orange when an error occurs in the device.
Bring the device closer to this mark when using the NFC
function.
For details on the NFC function, refer to "Using from a Mobile
Device (Advanced Manual)".
2. Setup
Advertisement
Table of Contents
