Group Setting - Fujitsu AIRSTAGE UTY-DCGYZ2 Operation Manual

3-1-2. Group Setting
Perform the group registration to combine the R.C.G. registered to this controller.
* One group including all indoor units (R.C.G.) registered by scanning is created at initial setting.
(3)
(1)
(2)
6

7
No. Item
Group name

[Delete] icon

[New] icon
3
"Registered"
4
R.C.G. list
5
Group switch-over button
6
R.C.G. scroll buttons
7
En-28
 4
3
7
Registers the group name. (Max. 13 characters) Up to 50 groups can be
registered.
The names can be input using keyboard and they can also be selected
from the fixed form phrase.
Deletes the group. When there is no group after deletion, "There is no
group to display." is displayed.
Adds the group. When the number of registered groups reaches 50, this
button is disabled.
Indicates that the R.C.G. is already selected by other groups.
When selected, checkbox is checked. Up to 100 R.C.G. can be registered
for one group.
Switches over the displayed group.
The right and left scroll buttons are displayed when R.C.G. are more than
25.
(1) Tap the MENU button.
(2) Tap the [Group Setting].
(3) Tap the [Create New Group] or group name.
(4) Register the group name and select the R.C.G. for each
group. (The R.C.G. selected by other groups can be selected
redundantly.)
5
(5) Set the item and tap the [OK] button.
Description