Fujitsu AIRSTAGE UTY-DCGYZ2 Operation Manual page 22

No. Item
"Enable" / "Disable" display

Schedule name

[Delete] icon
3
[Copy] icon
4
[New] icon
5
Day of week
6
Setting timer
7
Schedule switch-over button
8
Registered group
9
[Timer Edit] button

2-3-1-1. Group Selection
Set the groups to be controlled.

No. Item
Group

R.C.G. display button

En-22
Sets "Enable" or "Disable" for the registered schedule.
Registers the schedule name. (Max. 13 characters) Up to 20 schedules
can be registered.
The names can be input using keyboard and they can also be selected
from the fixed form phrase.
¡ Input candidate:
"Floor" / "Corridor" / "Whole" / "Hall" / "Office" / "Conf room" / "Receipt
room" / "Restaurant" / "Café" / "Lounge" / "Kitchen" / "Store" / "Stock room"
/ "Classroom" / "Reception" / "Entrance" / "Control room" / "Guest room"
/ "Room no." / "Locker room" / "Summer set" / "Winter set" / "Weekday" /
"Holiday"
* W hen the simplified Chinese is set at Language Setting, the candidates
are different.
Deletes the currently displayed schedule.
Newly creates the same schedule as the setting schedules at the end of
the existing schedules and displays the new creation screen.
Creates the new schedule at the end of the existing schedules and
displays the new creation screen.
Switches the timer to be set to the day of week. "Create new timer", "Day
Off", "Deregister", and registered timer can be selected.
Displays the setting timer name.
When not set, this column is blank. When Day off is set, "Day off" is
displayed.
Switches over the displayed schedule.
Sets the groups to be controlled. → Refer to 2-3-1-1.
Selects the new timer and registered timer and sets the details. → Refer
to 2-3-2.

Selects the groups to be registered. When selected, the checkbox is
checked.
Displays the R.C.G. registered to the group.
Description
Description