Fujitsu AIRSTAGE UTY-DCGYZ2 Operation Manual page 14

No. Item
All R.C.G. On/Off

Special state display

Date
3
Error display
4
[Schedule] icon
5
[Change Items] icon
6
Display switch-over
7
Menu button
8
Group display
9
Group name

Group operation status

Group expansion

Group scroll button

R.C.G. display

R.C.G. name

R.C.G. operation status

R.C.G. scroll button

En-14
When the password setting is valid, input the password after selecting the
process in the followings.
"All ON": Sets all R.C.G. registered to this controller to ON collectively.
The operation of all R.C.G. is turned On or Off collectively. →Refer to
2-1-1.
"Detail": Sets the operation contents in details. → Refer to 2-2-2.
On/Off icon: Colorfully indicates the ratio of operation On status for the
number of registered R.C.G..
Green: Operation On status, Gray: Operation Off status
Only when even one registered indoor unit or outdoor unit is in the
following special state, the icon is displayed.
Icon
Refrigerant leakage
Emergency stop
Maintenance mode / Bus priority
Displays the date and time.
When even one unit is abnormal in the registered indoor units or outdoor
units, [Error] icon is displayed.
Displays error information as follows:
• "Error Code": Displays the error code.
• "Address": Displays the address of the unit where an error occurs.
• "Model Name": Displays the model name of the unit where an error
occurs.
• Model Name: Displays as follows:
Outdoor unit: Outdoor Unit
Indoor unit: Group name or R.C.G. name
This controller: Central Controller
Displays the operation schedule setting screen. → Refer to 2-3.
Sets the contents to be displayed on the screen. → Refer to 2-1-1.
Switches over between the monitoring point display and 50 units display
alternately.
Displays the Setting Menu screen by tapping this button which is always
displayed. → Refer to Chap. 3.
Displays the groups which were already set. Displays the group operation
status. →Refer to [Table 1].
Display the group name.
Sets the operation contents of the tapped group. → Refer to 2-2-2.
Expands the R.C.G. registered to the group by tapping.
When the number of registered groups exceeds the maximum display
limit, the right and left scroll buttons are displayed.
Displays the R.C.G. registered to the group. (The registered R.C.G. are
displayed from left to right and from the top in ascending order of system
No. and unit No.)
Displays the R.C.G. name.
Displays the R.C.G. operation status. →Refer to [Table 1].
Sets the R.C.G. operation contents. → Refer to 2-2-2.
When the number of registered R.C.G. exceeds the maximum display
limit, the right and left scroll buttons are displayed.
Description
State