Electronic Temperature Regulator (Thermostat) 9.1Igloo Thermostat - Igloo KING EVO Instruction Manual

Cooling equipment

Table of Contents

Available languages

9.ELECTRONIC TEMPERATURE REGULATOR (THERMOSTAT)

9.1.IGLOO thermostat

Check the set temperature (inside the equipment) – Press▲ or ▼ once to check the temperature. The set tempera-

ture appears on the display, accompanied by a blinking red dot (LED). The preview will end automatically after about 3

seconds.

Increase or decrease the temperature - press ▼ (or▲) and the panel will display the set temperature. Press▼ to reduce

the temperature to the desired value. The function will be deactivated automatically after about 3 seconds.

Manual defrosting – press button 2 to start the defrosting cycle anytime (independently of the automatic defrosting func-

tion); the button is inactive when the temperature is higher than the defrosting end temperature.

•

It is recommended to turn the unit on/off using only the man switch, and not the switch (1) on the

thermostat panel. Putting the main switch to ON automatically starts the thermostat!

•

IMPORTANT: If the main switch is ON and the display shows only two dots, it means

that the thermostat is off and should be activated. Press the button (1) on the thermostat

panel.

* More on www.igloo.pl

I G L O O . P L

Fig. 14 IGLOO thermostat panel

1 – Refrigeration on/off button

2 – Manual defrosting button

3 – Unit operation and defrosting indicator light

4 – Button for preview of temperature on defro-

sting sensor

5 – Increase temperature button

6 – Decrease temperature button

Table of Contents

Chapters

Table of Contents