Compact 60 with a wedge design cabinet. All AER-systems are subtly dynamically controlled, which ensures absolute reliability in full load opera- tion despite strikingly small sizes and little weight. Read on and have fun using your Compact Slope!
2. Safety Instructions The following guidelines shall help minimize the risk of injury through fire or electric shock. The lightning flash with The exclamation point C AU T I O N the arrow head symbol within an equilateral RISK OF ELECTRIC SHOCK within an equilateral triangle is intended to DO NOT OPEN...
3. Controls and connections 13 14 15 Compact 60 IF_Compact60 _20120529 3.1 Front side 1) input (ch. 1) signal input, socket for 6,3 mm mono jackplug 2) high/low input sensitivity switch, attenuator = off = on 3) clip overload indicator 4) gain input level control 5) colour...
line out send tuner Compact 60 headphones return footswitch DI-out = int. efx 1 = gnd twin channel acoustic amplifier ring = ext. efx 2 = pos on/off 3 = neg power on C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN AT T E N T I O N RISQUE DE CHOC ELECTRIQUE...
4. Starting up The clip-LED indicates an overload. A short fl icker is of no danger to AER devices. During operation a 4.1 Cabling and switching on short fl icker can be accepted, to be on the safe side you should reduce the gain slightly to achieve an Before connecting to mains, please ensure that your optimal and distortion-free performance.
Please note: For both alterations the device must be opened, therefore only qualified service per- sonnel may carry out the modifications concer- We wish you lots of fun playing your Compact Slope! ning the de-/activating of phantom power. P.S.: For questions or suggestions contact us:...
Technical data Technical data Technical data Technical data 6. Technical specifications Compact Slope Inputs Inputs Inputs Inputs (notes 1, 2, 4) Tone controls Tone controls Tone controls Tone controls channel 1 channel 1 High impedance, unbalanced input for ch. 1 ch.
Need help?
Do you have a question about the Compact Slope and is the answer not in the manual?
Questions and answers