Controls And Connections; Front Side - AER MM200 User Manual

3. Controls and connections

1 2 3 4 5

3.1 Front side

1) input (ch. 1) signal input, socket for 6,3 mm mono jackplug
2) high/low input sensitivity switch, attenuator
3) clip overload indicator
4) gain
input level control
5) colour tone colour filter activation switch
6) bass
bass frequency level control
7) middle middle frequency level control
8) treble treble frequency level control
9) input (ch. 2) signal input, combo-socket for 6,3 mm mono jackplug and
XLR-male-connectors
10) line/mic signal source selector switch (combo-socket):
11) pan effect signal distribution control
12) select effect select switch
13) level
level control internal effect
14) power-led on/off status indicator
15) master
master level control
16) footswitch
mute footswitch input socket 6,3mm, mono, on-off
17) mute on-off switch
18) mute on-off indicator
6 7 8
line (only via jackplug) for instruments (pickup) and other line level sources
mic (only via XLR-connector) for microphones
9 10 3 4 6
= off
= not active
= off
8 11 12 13
Monte-Mute
16
Foot-Switch
= on
= active
channels 1 + 2
mains & master
= on
14 15
17 18
efx
mute
11