Controls And Connections - AER Dual mix 2 User Manual

3. Controls and connections

gain high pass lter functionality
in dB
0
-3
50
10
300 1.000
frequency Hz
Top side
gain input level control
clip overload indicator
Attn. signal source selector switch (combo socket):
on/off
(only via 6.3 mm jackplug) for instruments
(pickup) and other line level sources
gain mic (only via XLR-connector) for microphones
high
treble control
low bass control
efx 4-preset multi-effects unit
level level control internal effect
pan
effect signal distribution control
select effect select button with led-indicators
aux in stereo-input for additional signal sources
level
stereo input level control
master master level control
Rear side
24V phantom power
ch. 1 24V phantom power switch channel 1
ch. 2 24V phantom power switch channel 2
dc 24 V power supply connector socket (24 Volt DC)
mute
jack socket for a footswitch to
mute ch. 1 and/or ch. 2
line out signal output, 6.3 mm mono jack socket
DI out signal output, symmetrical, XLR-socket
DI level
DI out signal level control
Front side
channel 1 signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
channel 2
signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
hp filter
on/off-switch to activate the high-pass filter
frequency frequency-level control from 90 to 300 Hz
phones
stereo-headphones socket
aux-in stereo input for additional signal sources
(e.g. CD-player), 3.5 mm stereo jack socket
power
on/off-status indicator
3.1 High-Pass Filter
Each input section is provided with a gain control and a high-pass-
filter (hpf ) to exempt the signal from disturbing or problematic low
frequencies at the range of 50 to 300Hz.
20.000