Subscribe to Our Youtube Channel
Related Manuals for Daewoo DALGS18-1
Summary of Contents for Daewoo DALGS18-1
- Page 1 DALGS18-1 LITHIUM GRASS SHEAR USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
-
Page 2: Table Of Contents
INDEX 1. GENERAL SAFETY INSTRUCTIONS FOR ELECTRIC TOOLS ............5 2. SAFETY REGULATIONS .........................9 3. PROPER USE ............................11 4. BEFORE STARTING THE EQUIPMENT ....................11 5. OPERATION ............................12 6. CLEANING, MAINTENANCE AND ORDERING OF SPARE PARTS .............13 7. TECHNICAL DATA ..........................15 8. EXPLODED VIEW AND SPARE PARTS LIST ..................16 WARRANTY ............................... -
Page 5: General Safety Instructions For Electric Tools
1. GENERAL SAFETY INSTRUCTIONS FOR ELECTRIC TOOLS WARNING Read all the safety information, instructions, illustrations and technical data provided on or with this power tool. Failure to adhere to the following instructions may result in electric shock, fire and/or serious injury. Keep all the safety information and instructions in a safe place for future use. This equipment is not intended to be used by children, persons with reduced physical, sensory or mental capacities or with a lack of experience and knowledge, or persons who are not familiar with the instructions. - Page 6 • Only use the device in broad daylight or make sure that you provide adequate artificial light. • Important! The cutting tools continue running on after the device has been switched off. • When the device is not in use, make sure that it is stored in such a way that there is no risk of hands coming into contact with the cutting blades.
- Page 7 d) In case of incorrect use, fluid may escape from the battery. Avoid contact with it. If you touch it by accident, rinse the affected area with water. If you get the fluid in your eyes, also seek medical advice. Leaking battery fluid can cause skin irritation or burns. e) Never use damaged or altered rechargeable batteries.
- Page 8 switch off the equipment for safety reasons. Important. Do not press the ON/OFF switch any more if the protective cut-off has actuated. This may damage the battery pack. 11. Use only original battery packs. The use of other batteries may result in injuries, explosion and a fire risk.
-
Page 9: Safety Regulations
6. Protect batteries from overheating. Overloads, over-charging and exposure to direct sunlight will result in overheating and cell damage. Never charge or work with batteries which have been over- heated – replace them immediately if possible. 7. Storage of batteries, battery chargers and cordless tools. Store the charger and your cordless tool only in dry places with an ambient temperature of 10-40°C. - Page 10 This equipment is not intended to be used by children, persons with reduced physical, sensory or mental capacities or with a lack of experience and knowledge, or persons who are not familiar with the instructions. Children should be supervised so that they do not play with the equipment. Children are not allowed to carry out the cleaning or maintenance.
-
Page 11: Proper Use
• Cordless grass and shrub shears • Original operating instructions • Safety instructions 3. PROPER USE Grass shears: The equipment is designed for cutting the edges of lawns and small areas of grass in private and hobby gardens. Shrub shears: The equipment is designed for cutting small hedges and shrubs in private and hobby gardens. -
Page 12: Operation
To ensure that items are properly packaged and delivered when you send them to us, please con- tact our customer service or the point of sale at which the equipment was purchased. When shipping or disposing of batteries and cordless tools, always ensure that they are packed individually in plastic bags to prevent short circuits and fires. -
Page 13: Cleaning, Maintenance And Ordering Of Spare Parts
hood must be slid over the blade and the rechargeable battery removed when the equipment is not being used. • Shrubs which loose their leaves in the autumn should be cut in June and October. • Evergreen shrubs should be cut in April and August. 6.2.1 Assembly Since the equipment is supplied as grass shears (see section 6.1), the grass cutting blade has to be swapped over for the shrub cutter blade which is supplied with the product. - Page 14 • Identification number of the machine • Replacement part number of the part required 8. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic.
-
Page 15: Technical Data
7. TECHNICAL DATA Power: 20 V Running time: up to 40 min (base on 1.5Ah) No-load speed: 1200 rpm Blade material: SK5 Hedge trimmer cutting width: 200 mm Teeth distance: 8 mm Grass shear blade cutting width: 100 mm Thickness of grass blade: 1.3 mm/1.5 mm (upper/lower) Thickness of grass blade: 1.5 mm Quick blade change system Battery and charger not included... -
Page 16: Exploded View And Spare Parts List
8. EXPLODED VIEW AND SPARE PARTS LIST... - Page 17 shrub shear blade assy I nut M4 E washer 4Φ16*Φ4.3*Φ1.5 range ring upper shrub shear blade limit ring for shrub shear blade lower shrub shear blade screw M4*10 shrub shear blade cover right button of the blade cover blade box bottom left button of the blade cover eccentric gear blade box cap...
-
Page 18: Warranty
WARRANTY CARD Product model Date of sale Company Serial number Client's signature Username The product is in good conditions and fully complete. Read and agree the terms of the warranty. GUARANTEE The warranty period starts from the date of sale of the products and covers 2 years for all power products. During the warranty period, free failures caused due to the use of poor-quality materials in the production and manufacturer workmanship admitted fault are removed. - Page 19 Manufactured under license of Daewoo International Corporation, Korea...
Need help?
Do you have a question about the DALGS18-1 and is the answer not in the manual?
Questions and answers