Manual Mode - Nassenheider Fill Up 2 Manual

9.2.1

Manual mode

This mode of operation is used to prepare for the filling (to prime the product in order
to fill the priming hose and the pump head) and for continuously pumping (e.g. pumping
from one container to another one).
Forward continuously
Pressing the key briefly will start the filling prozess. Pressing a second
time will stop it. The product is pumped from above through the pump
head.
Forward interval
The product is pumped as long as the
anymore the motor stops. The product is pumped from above through the
pump head.
Reverse continuously
Pressing the key briefly will start the filling prozess. Pressing a second
time will stop it. The product is pumped from below through the pump
head.
Reverse interval
The product is pumped as long as the
anymore the motor stops. The product is pumped from below through the
pump head.
The filling nozzles must be removed for both reverse pump
options. They would offer too much resistance in the pumping
process and would thereby be damaged. There is also the risk of
overloading the motor.
Operation
key is pressed. Without pressing
key is pressed. Without pressing
31