Adjustment To The Jar Height And Size - Nassenheider Fill Up 2 Manual

16 Putting into operation
7.3

Adjustment to the jar height and size

The height below the filling nozzle can be adjusted between 5 and 30 cm for the stand
50 cm. For filling taller jars, a high stand can be purchased, if required (see chapter
Technical details of the machine: Technical data). The height adjustment takes
place by means of the locking lever at the driving module (see Fig. 5).
Generally, the filling nozzle should be fitted as tightly as possible over the jar opening.
Installation and adjustment of Y-bracket
and microswitch, see Fig. 6:
1. By means of the star grip and the guide plate,
the Y-bracket is attached to the stand and
positioned so that an adjacent jar is located
centrally under the filling nozzle.
2. By means of the knurled nut, the microswitch
is positoned that a pressed on jar actuates
the microswitch.
When releasing the lever, the driving module
must be held tightly in place from below, so that
it does not slip suddenly downwards on the
stand rod (see Fig. 5).
Fig. 6: Y-bracket and microswitch
Fig. 5: Height
adjustment