Table of Contents
Advertisement
10
Delivery
8
1 pc.
9
1 pc.
10
1 pc.
11
2 pc.
12
2 pc.
13
1 pc.
14
3 pc.
15
1 pc.
16
1 pc.
17
1 pc.
18
1 pc.
19
1 pc.
20
1 pc.
21
1 pc.
22
1 pc.
5.2
Content control
During our outgoing controls, all our deliveries are carefully checked for completeness
and intactness. Nevertheless, we recommend that, after unpacking the machine, you
check the delivery immediately for completeness according to your delivery note and
using Fig. 1.
In case of missing or damaged parts, please inform the company FILL-Systems GmbH
immediately in writing, at the latest within two working days after receiving the
delivery. We request you to note that upon expiry of this deadline, we can no longer
guarantee any replacement/subsequent delivery of parts at the company's expense.
Filling nozzle, flat
Limitation cross for flat filling nozzle
Combination wrench, SW 10 mm
Micro fuse, 8A, medium time lag, inscription:
M8/250
Gasket for clamping flange
Clamping flange Ø 37 for filling nozzles,
preassembled
Hose clamp, for hose Ø 40 mm, size 48
Check valve for hose Ø 40 mm (inkl. item 14)
Pipe bend 90°, bended aside, for pumping, for
hose Ø 40 mm (incl. item 12, 14)
Network cable/power cord, EU plug
Microswitch, 5-pin plug
Y-bracket
Pipe bend 90°, for hose Ø 40 mm (incl. item
12, 14)
Set of seals (replacement for pump head)
Stand 50 cm (incl. item 19)
Without exception, wear parts are not covered by the warranty.
All wear parts must be checked regularly for damage and wear and
replaced if necessary. Porous, leaking or worn parts must be replaced
immediately. Operation with defective parts can be harmful to the life,
electronics, mechanics and functionality of the machine as well as to
the quality of your product to be filled.
Among other things, the service life of the wear parts depends on the
respective products to be filled, the duration and nature of use and
on environmental conditions (temperature, corrosive fumes etc.).
The inactivity of the machine can also negatively affect the service
life of the wear parts due to the different ageing processes of
individual components.
306001
x
306006
x
307007
307009
x
307004
x
306007
304066
306038
304001
307022
307039
307034
304034
307043
x
303012
Advertisement
Table of Contents
