Advertisement
Quick Links
Advertisement
Related Manuals for Jason.L Just Right
Summary of Contents for Jason.L Just Right
- Page 1 Just Right height adjustable corner desk...
- Page 2 Installation Instruction Technical data Column Number Maximum Load 100KG Max Speed 25mm/s Input Voltage 100-240V Lowest Position 710mm Highest Position 1210mm 1020- 1600mm Width Range 1075- 1575mm 10%( Pause 18 minutes for each Duty Cycle continuous 2-minute operation ) Applicable Temperature 0~40°C STEP1 Accessory List...
- Page 3 STEP4 STEP3 Install Transmission Rod Install Supporting Plates 2.5x2.5 Connect the long supporting plate (9) to the columns (1) (3), connect the short supporting plate(10) to the column(2). fix them with the screw (C) and tighten the screw by 5X5 allen key(A). Install Tabletop, Control Box STEP5-A and Handset...
- Page 4 STEP8 Tighten the Beam Screw and the STEP6 Connect all Cable on to the Control Box Drive Rod Nut Do not connect the power before the wiring is completed. Power port Use the 4 x 4 allen key (A) to tighten the 8 screws on the long and short beams (4) (5), and use the nut wrench (G) to tighten the nuts on the long and short transmission rods (6) (7).