KOBE RA92 SQB-1 Parts Location And Replacement

RA92 SQB-1 Parts Location and Replacement

This basic guide is to show the parts location of the RA92 SQB-1 and how to remove or install certain parts.

To see more detailed guidelines, please visit:

For 30" wall mount models: RA9230SQB-1, RA9230SQB-DC30-1, RA9230SQB-DC46-1

For 36" wall mount models: RA9236SQB-1, RA9236SQB-DC30-1, RA9236SQB-DC46-1

1. Blower System

2. Control Panel

3. LED Light (3W)

All manuals and user guides at all-guides.com

KOBE Range Hoods

"So Quiet...You Won't Believe It's On!"

Overall Snapshot of RA92 SQB-1

Part #7 – See "Parts List" page on manual)

(Manual

Part #5– See "Parts List" page on manual)

(Manual

Part #4 – See "Parts List" page on manual)

(Manual

Page 1 of 5

Version 20160725

Kobe Service and Repair

Table of Contents

Need help?

Do you have a question about the RA92 SQB-1 and is the answer not in the manual?

Page 1 “So Quiet…You Won’t Believe It’s On!” RA92 SQB-1 Parts Location and Replacement This basic guide is to show the parts location of the RA92 SQB-1 and how to remove or install certain parts. To see more detailed guidelines, please visit: Kobe Service and Repair For 30”...
Page 2 All manuals and user guides at all-guides.com KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Capacitor Support Warning: 1. Loosen the screw first with a hand tool screw driver. 2. When pulling the wires from the capacitor support, press the ‘push release’...
Page 3 All manuals and user guides at all-guides.com KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Accessing the Capacitor and Processor Board Part #10 – See “Parts List” page on manual) 5. Capacitor (Manual Part #9 – See “Parts List” page on manual) 6.
Page 4 All manuals and user guides at all-guides.com KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Control Panel Figure 1 Figure 2 Figure 3 Figure 4 Accessing the LED Light For a more detailed guideline, visit: How to Replace LED Lights...
Page 5 All manuals and user guides at all-guides.com KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Blower System Warning: 1. Loosen the screw first with a hand tool screw driver. 2. Place a support or hold the blower before removing it.