PremierLink™ Controller (Factory Option)
RETURN AIR
SMOKE DETECTOR
For details on operating 50KCQ*04-06 units equipped with the
(AS SHIPPED)
factory-installed PremierLink controller option, refer to the
PremierLink Retrofit Rooftop Controller Version 3.x Installa-
tion, Start-Up, and Configuration Instructions manual.
RTU Open Controller (Factory-installed Option)
For details on operating 50KCQ*04-06 units equipped with the
factory-installed RTU Open controller refer to the Factory-In-
stalled RTU Open Multi-Protocol Controller Control, Start-
Up, Operation and Troubleshooting manual.
CONTROLLER OPTIONS
Low Ambient
If the unit comes with Electro-Mechanical (EM) control, then
no adjustment is necessary.
If the unit comes with the PremierLink™ or RTU Open control
option, then refer to its installation control manual for details
on adjusting "Cooling Lock-Out" setting and configure for the
specific job requirements.
Fig. 54 — Return Air Smoke Detector, Shipping
Position
STEP 1
STEP 2
STEP 3
Fig. 55 — Completing Installation of Return-Air Smoke Sensor
®
Fig. 56 — EconoMi$er IV
Wiring
41