Deleting A Service Template - Palm Treo 270 User Manual

Wait For Tells your communicator to wait for specific characters from the TCP/IP
server before executing the next command.
Wait For Detects a challenge-response prompt from the server and displays a
Prompt dynamically generated challenge value. When you enter the challenge value
into your token card, this generates a response value for you to enter on your
communicator. This command takes two arguments, separated by a vertical
bar (|) on the input line.
Send Transmits specific characters to the TCP/IP server to which you are
connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server to which you
are connecting.
Send User ID Transmits the User ID information entered in the User ID field of the Network
Preferences screen.
Send Transmits the password entered in the Password field of the Network
Password Preferences screen. If you did not enter a password, this command prompts
you to enter one. The Password command is usually followed by a Send CR
command.
Delay Tells your communicator to wait a specific number of seconds before
executing the next command in the login script.
Get IP Reads an IP address and uses it as the IP address for your communicator.
This command is used with SLIP connections.
Prompt Opens a dialog box and prompts you to enter text of some kind (for example,
a password or a security code).
End
Identifies the last line in the login script.
4. Repeat steps 2 and 3 until the login script is complete.
5. Hold Option

Deleting a service template

There is only one way to delete a service template: use the Delete command from the Service
menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Press Menu
4. Under Service, select Delete (/D).
5. Hold Option
Chapter 7
and press Return
.
and press Return
to finish.
to finish.
Page 191