Creating A Message Signature - Palm Treo 270 User Manual

6. Hold Option
7. Make sure wireless mode is on. See page 19 for details.
8. Hold Option
The message goes into the Pending category until your phone transmits the message. After your
message transmits, your Treo places a copy in the Sent category. If an error occurs while sending
the message, an ! appears next to the message header. Select the message to view information
about why the message did not go through.

Creating a message signature

You can create a signature of up to 80 characters. Then, when you create a message, SMS
Messaging automatically inserts your signature at the end of each message you create. If
necessary, you can edit the default signature text when you create a message.
Note: The signature text you define applies only to new messages. If you are editing a message
or have messages in the Pending folder when you create the signature text, the signature
text will not be added to those messages. If you enable or disable the signature option,
the signature will not be added or removed from those messages either.
To create a message signature:
1. From any SMS Messaging list view, press Menu
2. Under Options, select Signature.
Tap here to add the
signature to your
messages
3. Enter the signature text.
4. Hold Option
Chapter 6
Tap
Boilerplate
and press Return
and press Return
and press Return
to finish.
to send the message.
.
Enter the default
signature text
to finish.
Page 139