CAMION ICE MASTER T Series Owner's Manual
  1. Manuals
  2. Brands
  3. CAMION Manuals
  4. Industrial Equipment
  5. ICE MASTER T Series
  6. Owner's manual

CAMION ICE MASTER T Series Owner's Manual

Hide thumbs Also See for ICE MASTER T Series:
Table of Contents

Advertisement

Quick Links

Download this manual
ICE MASTER T-SERIES
IMT250E
IMT250ESC
IMT250G
IMT250GSC
Version 1.7
OWNER'S MANUAL
Product Codes:
IMT300E
IMT500E
IMT300ESC
IMT500ESC
IMT300G
IMT500G
IMT300GSC
IMT500GSC
Copyright © Enduraplas. All Rights Reserved.
®
IMT800E
IMT800ESC
IMT800G
IMT800GSC
IMT995E
IMT995ESC
IMT995G
IMT995GSC

Advertisement

Table of Contents
loading

Related Manuals for CAMION ICE MASTER T Series

Summary of Contents for CAMION ICE MASTER T Series

  • Page 1 ICE MASTER T-SERIES ® OWNER’S MANUAL Product Codes: IMT250E IMT300E IMT500E IMT800E IMT995E IMT250ESC IMT300ESC IMT500ESC IMT800ESC IMT995ESC IMT250G IMT300G IMT500G IMT800G IMT995G IMT250GSC IMT300GSC IMT500GSC IMT800GSC IMT995GSC Version 1.7 Copyright © Enduraplas. All Rights Reserved.

  • Page 2: Table Of Contents

    English CONTENTS INTRODUCTION WARNINGS 4 & 5 GETTING STARTED 6 - 15 CALIBRATING 16 & 17 MAINTAINING 18 & 19 TROUBLESHOOTING 20 & 21 PARTS BREAKDOWNS - ICE MASTER ® 22 - 78 T-SERIES WARRANTY 79 - 81 Ice Master T-Series ®...

  • Page 3: Introduction

    English INTRODUCTION Congratulations! You now own a Camion™ sprayer. Durable design and construction assure you a lifetime of extreme performance. No sprayer is tougher. No sprayer will last longer. Take a look through this owner’s manual to learn how the pros use their Camion™...

  • Page 4: Warnings ! 4

    English WARNINGS 1. Do not exceed vehicle manufacturers loading, towing or lifting specifications and regulations. 2. Ensure tank is firmly secured in an appropriate manner. 3. Use caution at all times, particularly when driving on rough terrain. 4. Comply with chemical manufacturers safety requirements and all relevant legislations.
  • Page 5 English 13. No modifications and/or alterations may be made to this sprayer. Any such modifications not only void the sprayer warranty but can make the unit dangerous to anyone operating the pump. 14. Always inspect hoses and piping to avoid burst injuries. 15.

  • Page 6: Getting Started

    English GETTING STARTED Setting Up Your Sprayer 1) The two openings at the front of the frame allow you to move the unit using fork points. 2) When loading your sprayer, we recommend you place blocking between your sprayer and the front of the bed of your truck.
  • Page 7 English GETTING STARTED Setting Up Your Sprayer 5) Insert the receiver bracket into the truck receiver hitch and secure with lock pin. 6) Take the three hoses from the boom and connect them to the control valves using the camlock system. 7) If you purchased a unit with our high flow electric Ecomax®...
  • Page 8 English GETTING STARTED Setting Up Your Sprayer 9) If you purchased a hydraulic unit, hook up your desired hydraulic hoses to the side ports on the hydraulic pump. This pump requires 13 GPM oil flow. 10) If you have a gas powered unit, fill the fuel tank on the engine with regular gasoline.
  • Page 9 English GETTING STARTED Hooking Up Standard Controls 1) If your applicator does not have a GPS flow control option, you will need to connect the standard control wire harness to the 3 electric valves that will control your left, center, and right boom sections.
  • Page 10 English GETTING STARTED Hooking Up GPS Flow Control ® 1) Hook up Storm Commander control box arm to back of controller and install controller mount into the cupholder of the vehicle cab. 2) Plug in your RV plug in vehicle cab to ®...
  • Page 11 English GETTING STARTED Operating Your Sprayer 1) You will need to prime the pump before using it. Start by filling the tank at least a quarter full of water. 2) Then open the suction valve between the tank and the pump. 3) Place the 3-way valve in recirculation position to allow liquid to recirculate back to the tank.
  • Page 12 English GETTING STARTED Operating Your Sprayer 4) If your applicator has the gas engine driven pump, open the top cap of the pump, and fill the pump with water. Before starting the engine make sure both the drain plug and prime plug are tightened securely to properly hold the sealing O-rings in place.
  • Page 13 English GETTING STARTED Operating Your Sprayer 8) To fill the applicator, close the suction valve between the tank and the pump (picture shown in open position). 9) Make sure the 3-way valve on top of pump is in recirculation position, then connect storage source hose to your applicator and open the external fill valve.
  • Page 14 English GETTING STARTED Operating Hand Gun 1) To use the spray gun, ensure the 3-way valve on top of pump is in closed position and hose reel shutoff valve is in the open position (3-way valve shown in recirculation position). Important Tip: If you are using your hand wand for extended periods of time, it is best to leave the 3-way valve, on top of pump,...
  • Page 15 English GETTING STARTED Operating Your Sprayer 14) If you purchased the optional storage stand, you can attach the legs with the supplied pins. 15) If you purchased the optional self- loading leg stand, adjust legs to desired height. Version 1.7...

  • Page 16: Calibrating 16

    English CALIBRATING Note: Always double check your application rates. The rate/acre listed is only based off the center section (not the two side nozzles) Ice Master T-Series ®...
  • Page 17 English GPM = Gallons Per Minute GPA = Gallons Per Acre GAL/1000 FT = Gallons Per 1000 Square Feet W = Nozzle spacing Gallons Per Minute Formula: GPA x MPH x W (per nozzle) 5,940 Gallons Per Minute Formula: GAL/1000FT x MPH x W (per nozzle) Gallons Per Acre Formula: 5,940 x GPM (per nozzle) MPH x W...

  • Page 18: Maintaining 18

    English MAINTAINING Keeping your sprayer in good condition will help you lengthen the life of the sprayer. Everyone knows a well maintained piece of equipment ensures a longer life span. Sprayer maintenance can seem a huge task if you don’t have the right tools.
  • Page 19 English If required If damaged Every 250 operating hours o once a year After the first 5 operating hours Weekly or every 40 operating hours At the end of work and/or daily Before starting work Version 1.7...

  • Page 20: Troubleshooting 20

    English TROUBLESHOOTING CONDITION CAUSE REMEDY Pump will not 1) Air leak on suction 1) Tighten/replace prime plumbing fittings & hose 2) Blocked/Restricted clamps. Verify suction intake hose hoses are in good 3) Filter cap condition disengaged 2) Remove blockage 3) Filter gasket from suction line, damaged/missing ensure line is not...
  • Page 21 English CONDITION CAUSE REMEDY Pressure gauge 1) Plugged with debris 1) Un-thread, check not registering and clean pressure gauge Hand gun loses 1) Debris in hose or 1) Un-thread nozzle pressure nozzle tip and clean 2) Pump losing prime 2) See Remedy for 3) Pump pressure ‘Pump will not prime dropping/fluctuating...

  • Page 22: Parts Breakdowns - Ice Master

    PARTS BREAKDOWN CONTENTS ECOMAX® NON-GPS 23 - 32 ECOMAX® GPS 33 - 38 GAS NON-GPS 39 - 44 GAS GPS 45 - 50 HYDRAULIC GPS 51 - 56 HYDRAULIC NON-GPS 57 - 62 12 NOZZLE BOOM 63 & 64 22 NOZZLE BOOM 65 &...

  • Page 23: Ecomax® Non-Gps

    IMT500-ECOMAX NON GPS 2023 Version 1.7...
  • Page 24 OVERVIEW T-SERIES ECOMAX NON GPS PLUMBING 2023 View A Ice Master T-Series ®...
  • Page 25 VIEW A View A Version 1.7...
  • Page 26 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. THD00500OE-NF 500 Gal Sump Bot Tank AVB355 STBBS35 Lg Baffle Ball CFLP16HV 16 inch Hypro Lid Hinged AZFPM0500SS 500 Gallon Pro Master™ Frame - 304 Stainless Steel CBTF200 2 Poly Tank Flange Assembly CBHB20090 2"...
  • Page 27 PLUMBING T-SERIES ECOMAX NON GPS PLUMBING 2023 Version 1.7...
  • Page 28 DETAIL VIEWS View C View B View C View B View A VIEW A View A View A View A Ice Master T-Series ®...
  • Page 29 VIEW B View B Version 1.7...
  • Page 30 VIEW C View C Ice Master T-Series ®...
  • Page 31 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap CBMV220BLSH 2” FP Bot Load Manifold Valve w/ SH Handle CBM100A 1"...
  • Page 32 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CSLC432 12V Heavy Duty Pump Plate AVPC03 EcoMax Pump Cover CHBS020523 5-16 x 1 Bolt Stainless Steel CHWSL023 5-16 SS Lock Washer CHNSW0323 3/8 Wingnut SS CBMCV220 2 inch Full Port Manifold Checkvalve Assembly CBM200125MPTSS 2 IN FP Flange x 1.25 IN Male Thread CBM220200CPG...

  • Page 33: Ecomax Gps

    ECOMAX GPS T-SERIES ECOMAX GPS PLUMBING 2023 Version 1.7...
  • Page 34 DETAIL VIEW View C View B View A VIEW A View A Ice Master T-Series ®...
  • Page 35 VIEW B View B Version 1.7...
  • Page 36 VIEW C View C Ice Master T-Series ®...
  • Page 37 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap CBMV220BLSH 2” FP Bot Load Manifold Valve w/ SH Handle CBM100A 1"...
  • Page 38 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CBM220ASWP90 2 inch Full Port Flange x Hose Shank Sweep CB200C90 90 Female coupling to hose shank CBV25271 90 degree Mounting Bracket CBMEVX103A 3-bank electric Banjo Valve bolted with pin con CHUS031234002 1.75 SS U-Bolt APAMT001 12V IMS Ecomax pump...

  • Page 39: Gas Non-Gps

    GAS NON GPS T-SERIES GAS NON GPS PLUMBING 2023 Version 1.7...
  • Page 40 DETAIL VIEW View C View B View A VIEW A View A B C A Ice Master T-Series ®...
  • Page 41 VIEW B View B Version 1.7...
  • Page 42 VIEW C View C Ice Master T-Series ®...
  • Page 43 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. 2 inch Poly Pump with 5.5HP Honda Engine Electric CB200PH5E Start CBM220MPT 2-in FP Manifold x 2-in Male Thread CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap...
  • Page 44 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CHUS031234002 1.75 SS U-Bolt CTEW018 Battery Terminal - Standard Lug Plated CTEW017 Battery Cable - 4GA. Black CTEW016 Battery Cable - 4GA. Red CTEW037 Battery Box, Polypropylene, for U1 Battery Size IMSLB01 IMS T-series light kit Ice Master T-Series...

  • Page 45: Gas Gps

    GAS GPS T-SERIES GAS GPS PLUMBING 2023 Version 1.7...
  • Page 46 OVERVIEW View B View C View A VIEW A View A Ice Master T-Series ®...
  • Page 47 VIEW B View B Version 1.7...
  • Page 48 VIEW C View C Ice Master T-Series ®...
  • Page 49 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. 2 inch Poly Pump with 5.5HP Honda Engine Electric CB200PH5E Start CBM220MPT 2-in FP Manifold x 2-in Male Thread CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap...
  • Page 50 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CBMVS220CF 2-in Full Port Stubby Manifold Valve CBM220ASWP90 2 inch Full Port Flange x Hose Shank Sweep CB200C90 90 Female coupling to hose shank CSLC729 Valve Bracket for Gas T-Series CBMEVX103A 3-bank electric Banjo Valve bolted with pin con CHUS031234002 1.75 SS U-Bolt CTEW018...

  • Page 51: Hydraulic Gps

    HYDRAULIC GPS HYDRAULIC GPS PLUMBING 2023 Version 1.7...
  • Page 52 OVERVIEW View B View C ViewA VIEW A View A Ice Master T-Series ®...
  • Page 53 VIEW B View B Version 1.7...
  • Page 54 VIEW C View C Ice Master T-Series ®...
  • Page 55 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. APDC09HS SS Hydraulic pump CBM220MPT 2-in FP Manifold x 2-in Male Thread CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap CBMV220BLSH...
  • Page 56 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CHAS050723 1/2" x 1-1/2" Stainless Hex Bolt All Thread CHNSN0533 1/2" Nylock Nut 304 SS CHWSF053 1/2 SS flat washer CA46221A58787 Electro-Magnetic Flowmeter with 2 inch Full Port CSLC723 MTS Controller Valve Bracket CBMEVXR2W220A 2 IN Bolted Full Port Reg Valve w3pin WP Con CEC065...

  • Page 57: Hydraulic Non-Gps

    HYDRAULIC NON GPS HYDRAULIC NON GPS PLUMBING 2023 Version 1.7...
  • Page 58 OVERVIEW View B View C View A VIEW A View A Ice Master T-Series ®...
  • Page 59 VIEW B View B Version 1.7...
  • Page 60 VIEW C View C Ice Master T-Series ®...
  • Page 61 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. APDC09HS SS Hydraulic pump CBM220MPT 2-in FP Manifold x 2-in Male Thread CBMLS22216 MLS222 Y-Strainer 16 Mesh CBM220TEE 2 Manifold Tee - 220 Series CBMVSF220FP 2-in FP Manifold x 2-in Male Adaptor CB200CAP 2-in Cap CBMV220BLSH...
  • Page 62 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CLUESB020002 1/2" hose (to hose reel) CHAS050723 1/2" x 1-1/2" Stainless Hex Bolt All Thread CHNSN0533 1/2" Nylock Nut 304 SS CHWSF053 1/2 SS flat washer CBM220CPG6 2 x 2 Full Port Flange x 6" CEWCIM03 16 GA IM Wire Harness-3 toggle switch IMSLB01...

  • Page 63: Nozzle Boom 63

    12 NOZZLE BOOM OVERVIEW Version 1.7...
  • Page 64 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. AZFPM025 SS Boom Shroud for T-series AZFPM015 1" Pipe Clamp CB100A 1" Male Adapter x 1" FNPT CNST017 TeeJet 1/4" NPT x BSPT Female Connection Adapter CHBS030723C 3/8" x 1-1/2" SS Carriage Bolt CHNSH0323 3/8"...

  • Page 65: Nozzle Boom 65

    22 NOZZLE BOOM OVERVIEW Version 1.7...
  • Page 66 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CFSN05M05M17 1" x 4" Stainless Steel Nipple CFSN05M05M12 1" x 1-1/2" Stainless Steel Nipple CFSS05M05B304 1" MPT x 1" SS Hose Barb CFSCR05F304 1" Threaded SS Cross CFST05F304 1" SS Tee CFSRB05F00M304 1"...

  • Page 67: Deicing Hose Reel

    CFRH03C PHENOIC TAPERED HANDLE CHWZF105 1 SAE Flat Washer CFBW04M04FB .5 M BSP - .5 F NPT Heavy Duty Swivel CFPS02M02B 1-2 MPT x 1-2 Hose Barb DEICING HOSE REEL CLUESB020002 1/2 EPDM HOSE - 50" AZKH0018 Lock for Small Hose Reel AZKH0003SS 3ASR03B HR FRAME 304 SS AZKH0003...

  • Page 68: Light Kit

    LIGHT KIT ITEM NO. Part # DESCRIPTION QTY. AZKF0020 3 bank electric valve light bracket CEWCIM05 Light Wire Harness IMS CHNSN903 10-32 18-8 SS LOCKNUT CHMS900213 10-32 - 1/2 Pan head screw CHNSN0223 5-16 SS Nyloc Nut CHWSF023 5/16" SS Flat Washer CHBS020323 5-16 x .75 SS Bolt IMTLB01...

  • Page 69: Adjustable Receiver Hitch

    ADJUSTABLE RECEIVER HITCH ITEM NO. Part # DESCRIPTION QTY. AZKI017 Adj Rec hitch U - Bracket AZKI018 Adj Rec Hitch Tube CHBS030523 3-8" x 1" SS Hex Bolt CHWSF033 3/8 SS Flat washer CHWSL033 3/8" SS Lock Washer CHNSN0323 3/8" SS Nylock Nut CHBS031523 3/8-16 X 3-1/2 SS ALL THREAD BOLTS Adjustable...

  • Page 70: Options

    ADJUSTABLE BOOM BRACKET ITEM NO. Part # DESCRIPTION QTY. AZKB0005SS 23.75" Stainless Steel Adj. Boom Bracket CHNSN0323 3/8" SS Nylock Nut CHWSF033 3/8" SS Flat Washer CHBS030523 3-8" x 1" SS Hex Bolt CHWNR03 Self retaining washer for 3/8 and M9 Adjustable Boom Bracket Ice Master T-Series...
  • Page 71 24" FOLDING BOOM BRACKET IMSBAM1F ITEM NO. Part # DESCRIPTION QTY. CSLC461 Cross Support for Folding Boom tubes CSLC462 Adj Folding Boom Fstng Bracket AZKB0005SS 23.75" Stainless Steel Adj. Boom Bracket CHBS051123 2.5 IN x .5 IN Stainless bolt CHBS030523 3-8"...
  • Page 72 38" FOLDING BOOM BRACKET IMSBAM2F ITEM NO. Part # DESCRIPTION QTY. CSLC461 Cross Support for Folding Boom tubes CSLC462 Adj Folding Boom Fstng Bracket AZKB0006SS 38 Adjustable Boom Bracket CHBS051123 2.5 IN x .5 IN Stainless bolt CHBS030523 3-8" x 1" SS Hex Bolt CHNSN0323 3/8"...
  • Page 73 STORAGE STAND ITEM NO. Part # DESCRIPTION QTY. AZKI001 IMS Leg Stand Sleeve AZKI002 IMS Leg Stand Leg CV722HP 5/8 x 3 Bent Hitch Pin CHAS050723 1/2" x 1-1/2" Stainless Hex Bolt All Thread CHNSN0533 1/2 Nylock Nut 304 SS Compatible with units up to 500 Gallons IMSLS01...
  • Page 74 SELF-LOADING LEGSTAND IMSLS02 Compatible with Frames 500 and larger Ice Master T-Series ®...
  • Page 75 SELF-LOADING LEGSTAND Front legs are folded Rear legs are lifted Version 1.7...
  • Page 76 PARTS LIST ITEM NO. Part # DESCRIPTION QTY. AZKI022 IMS Rear Leg Bracket for 4 IN Kit AZKI025 IMS Rear Adj Leg for 4 IN Kit AZKI024 IMS Front Upper Leg for 4 IN Kit AZKI023 IMS Front Adj Leg for 4 IN Kit AZKIR001 Roller wheel for IMSLS02 Folding Leg Kit CHBZ089525...
  • Page 77 HOSE REEL BRACKET RISER ITEM NO. PART # DESCRIPTION QTY. CHNSN0323 3/8" SS Nylock Nut CHWSF033 3/8 SS Flat washer CHBS030523 3-8" x 1" SS Hex Bolt AZKH0020 Hose Reel Bracket Riser Hose reel installation Install to frame Hose Reel Bracket Riser (Optional) Version 1.7...
  • Page 78 HITCH PIN BRACKET ASSEMBLY ITEM NO. Part # DESCRIPTION QTY. CHBS050723 .5 x 1.5 IN 18-8 Stainless Hex Head Bolt CHWSF053 1/2 SS flat washer CHNSN0533 1/2" Nylock Nut 304 SS AZKI008 Tail Gate Locking Pin Bracket Stainless Steel L&R Set Hitch Pin Bracket Assembly T-Series Frame Ice Master...

  • Page 79: Warranty

    English WARRANTY • • • • • • • • Version 1.7...
  • Page 80 English WARRANTY Ice Master T-Series ®...
  • Page 81 English ACTIVATE YOUR 10-YEAR WARRANTY How to Activate To double your 5-year tank warranty, visit www.camionsystems.com/warranty/ and register this product. Watch Instruction Videos: www.youtube.com Discover More Helpful Tips: www.IceControlTraining.com Version 1.7...
  • Page 82 CAMION ® by Enduraplas 1 (877) 265-9929 cs@camionsystems.com www.camionsystems.com 113 1st Street, Neche ND 58265, USA Discover More Helpful Tips: www.IceControlTraining.com Copyright © Enduraplas. All Rights Reserved.

This manual is also suitable for:

Ice master imt250eIce master imt250escIce master imt250gIce master imt250gscIce master imt300eIce master imt300esc ... Show all

Table of Contents